Audited Supplier
Epoxy Zinc Rich-80.1
Zinc Gray (Non-Adjustable Color)
Liquid
Epoxy
Spray/Brush/Roll
Primer
Air Drying
ISO9001, ISO9000
Steel
Epoxy Resin + Zinc Powder, etc.
Conversion Type
80%
Hg/T3668-2009
4h (23ºC)
27ºC
a:B=10:1
20-30min (23ºC)
1year
23ºC, ≤30min
23ºC, ≤24h
23ºC, ≤7D
80±2ºC, 60min
23ºC, 6h
No Limit
Ayrood
Barrel
Main Paint 25KG + Curing Agent 2.5KG
Jining, Shandong, China
Product Description
| High Voltage Tower Equipment Paint/(Zinc 80%) Bridge Anti-rust Paint/Epoxy Zinc Rich Primer |
| We use paint packaging cans imported from Germany, transport will be free for you to strengthen the packaging, to ensure that the product is transported to your hands is the most perfect state, and our packaging design is exquisite, excellent workmanship, the quality of the product itself is excellent, so the products are exported to dozens of countries and regions. |
Design Usage
It is mainly used as a long-term anti-corrosive bottom coating for structure and steel products.
Design Feature
1. Fast drying at normal temperature;
2. Good adhesive;
3. Corrosion resistance;
4. Tough paint film;
5. Easy to construct;
6. High zinc content, cathodic protection;
5. Excellent anti-rust performance.
2. Good adhesive;
3. Corrosion resistance;
4. Tough paint film;
5. Easy to construct;
6. High zinc content, cathodic protection;
5. Excellent anti-rust performance.
Product Parameters
| Density | About 2.30g/cm3 | |
| Volume solid | 50±3% (after mixing) | |
| Theoretical dosage | 0.37kg/m2 | |
| Drying time | Natural drying (23ºC) | Surface drying ≤ 30min |
| Actual drying ≤ 24h | ||
| Fully cured ≤7d | ||
| Stoving (work-piece surface temperature is 80±2ºC) | 60min | |
| Re-coating interval | Min interval time | 6h (23ºC) |
| Max interval time | no limit | |
| Actual dosage | Spraying | about 0.63kg/m2 |
| Brushing | about 0.48kg/m2 | |
Execution Conditions
1. Surface treatment:Steel sandblasting to Sa2.5 level, or manual rust removal St3 level, surface roughness 40~70µm;
2. Temperature and humidity:
The substrate temperature is 0~50ºC, and must be 3ºC above the dew point, and the relative humidity is less than 85%.
Painting Method
| Airless spraying | Diluent | Epoxy Special Diluent |
| Nozzle Diameter | 0.4~0.5mm | |
| Ejection pressure | 12~15MPa (about 120~150kg/cm2) | |
| Air spraying | Diluent | Epoxy Special Diluent |
| Nozzle Diameter | 2.0~3.0mm | |
| Air pressure | 0.3~0.6MPa (about 3~6kg/cm2) | |
| Roll coating or brush coating | Generally not suitable for large area construction, limited to small area repair. | |
Company Profile
Packing
Certifications
