Audited Supplier
General Information
Features
- Outside-to-inside flow direction
- New generation PVDF hollow fiber
- Nominal pore size of 0.03 μm
- Typical filtrate quality SDI ≤ 2.5, turbidity ≤ 0.1 NTU
Advantages
- Integrated design for easy installation
- High-quality filtrate
- Less energy needed by high flux
- Longer service life by high fouling resistance and mechanical strength
- Direct and economical module replacement
Applications
- Surface water
- Potable water
- Beverage clarification
- Industrial process water
- Industrial wastewater
- Reclaimed water reuse
- Pre-treatment of sea water desalination
Module Dimensions
| Model | Application | L | L1 | L2 | D | W |
| TFIM-77P | Industrial | 2488±3 mm (98±0.1 inch) | 2189±3 mm (86.2±0.1 inch) | 2000±3 mm (78.8±0.1 inch) | 225 mm (8.9 inch) | 360 mm (14.1 inch) |
Specifications
| Specifications | Parameters |
| Model | TFIM-77P |
| Effective membrane area | 77 m² (829 ft²) |
| Volume | 53 L (14 gallon) |
| Dry weight | 66 KG (119 lbs) |
| Wet weight filled with water | 146 KG (262 lbs) |
| Membrane material | PVDF (Polyvinylidene Fluoride) |
| Fiber ID/OD | 0.7/1.3 mm (0.02/0.05 inch) |
| Flow direction | Outside-in |
| Pore size | 0.03 μm |
| Housing material | UPVC |
| Clamp material | Stainless Steel |
| Potting material | Epoxy resin/Polyurethane |
| Feed, concentrate connector | DN100 coupling |
| Filtrate connector | DN40 union |
| Air connector | 3/8" |
Operating and Cleaning Limits
| Type of operation | Dead-end flow or cross flow |
| Design flux(25°C) | 40-120 L/m2·h(24-71 gfd) |
| Temperature | 1-40°C(34-104°F) |
| Maximum feed pressure(20°C) | 6.25 bar(90.6 psi) |
| Maximum feed pressure(40°C) | 4.75 bar(68.8 psi) |
| Maximum trans-membrane pressure | 2.1 bar(30.5 psi) |
| Backwash flux(25°C) | 80-120 L/m2·h(48-71 gfd) |
| Maximum backwash pressure | 2.5 bar(36 psi) |
| Maximum air scour feed pressure | 2.5 bar(36 psi) |
| Maximum air scour flow | 4-12 Nm3/hr(2.4-7.1 scfm) |
| pH-Continuous operation @25°C | 2-11 |
| Maximum NaClO | 2,000 mg/L |
| Maximum feed TSS | 100 ppm |
| Maximum feed turbidity | 300 NTU |
| Maximum feed particle size | 300 µm |
| Filtrate SDI15 | ≤2.5 |
| Filtrate turbidity | ≤0.1 NTU |
ISO 9001:2015 Quality Management Systems Certificate
TÜV Audit Certificate
Export License
1. Customer-centric company culture
2. Efficient and flexible organizational system
3. 20+ years experience in membrane research, development and manufacturing
4. Better cost-effectiveness
1. Warranty granted.
2. Remote technical training, guidance and support.
3. On-site technical support for training, installation, commissioning, operation and trouble shooting.
4. Free replacement in warranty period.
Feedback Handling Process as below:
Picking up the phone and having the plant manager yelling at you about undelivered membranes and filters?
Your customers are complaining to you about the high costs of existing membranes and filters?
Feel frustrated in prices when you are bidding?
Send your inquiry to us and get a quote for your project now!
