Audited Supplier
LKS Safety PLC
4~20mA; 0~20mA; Binary; Soe
Automatic Control, Protection, Monitoring, Measurement
CE, Eac; TUV; Sil2; G3
New
Customized
Plastic Sealing Process
4-20 Ma Hart
Process Control
HollySys
Transported in Standard Packaging
China
8537101101
Product Description
Introduction
LKS functional safety PLCs are the first set of dual-rack redundant safety PLCs developed by HollySys. They passed the SIL2 certification of TÜV SUD and comply with IEC61508, IEC61511 and EN50128, EN50129, EN50126 and IEC61784-3 standards. They adopt the latest electronic technology and single-loop diagnostic architecture (1oo1D) design. LKS functional safety PLCs can be applied to safety-related systems requiring a safety integrity level of SIL2 or below, such as Emergency Shutdown (ESD) system, Process Shutdown (PSD) system, and Burner Management System (BMS), Fire & Gas System (FGS), Emergency Trip System (ETS), and Gas Detection System (GDS) to provide safe and reliable solutions for different fields.
Features
· System with 1001D architecture and SIL2 certification
· Dual-rack redundancy configuration, and support for power, CPU, and communication redundancy
· Dual-core CPU with asymmetric AMP heterogeneous technology
· Controller adopting the safety and security fusion technology
· Over 90% of diagnosis coverage and over 100,000 h of MTBF
· International safety standards and safety protocols compliant in process and rail industry
· Operating temperature ranging from -40ºC to +70ºC and storage temperature ranging from -40ºC to +80ºC
· TÜV Rheinland certified reliability test center
· Implementation of hundreds of functional safety projects
· Participation in the preparation of national functional safety standards
· TÜV Functional Safety EngineerTechnical Specifications
Safty CPU Module LK220S
| Operation Speed | |
| CPU dominant frequency | Dual-core, 667 MHz |
| Instruction execution speed | Typical value: 2.5 DMIPS/MHz |
| Memory | |
| Program storage | 32 MB (16 MB for the system and 16 MB for users) |
| Memory | 512 MB, 800 Mbit/s, 32-bit width |
| Power-off hold | 512 KB |
| Expanding storage | SD card, up to 32 GB |
| Ethernet | |
| 10/100M | Two-channel, dual-network-port redundancy, Modbus TCP protocol supported |
| Real Time Clock | |
| Data format | Year:month:day:hour: minute:second, BCD code |
| Clock accuracy | Not more than 1 minute/month @25° C |
| Backplane Bus | |
| Communication Speed | 2.5 Gb/S |
| Load Capacity | 1×4 route |
| Hot Swap | |
| Module hot swap | Support |
| System Capacity | |
| I/O capacity | The I/O capacity supported by the system is greater than 900 points |
| Configuration Capacity | |
| Input variable area (I) | Maximum space: 128 KB |
| Input variable area (Q) | Maximum space: 128 KB |
| Global variable area (G) | Maximum space: 1 MB |
| Free variable zone (M) | Maximum space: 1 MB |
| Power-off holding area (R) | Maximum space: 64 KB |
| Special register area (S) | 16 KB |
| Power | |
| Power supply | Provided by backplane |
| Module (max.) | 300mA @24VDC |
| Backup battery | Capacitor power supply |
| Redundancy | |
| Dual backplane redundancy | Support hot-standby |
| Start Time | |
| Duration from module power-on to user project start | ≤ 60s |
| Physical Characteristics | |
| Installation mode | Backplane Slot |
| Module dimensions (W×H×D) | 44.7 mm ×166 mm ×152 mm |
| Weight | 382 g |
| Environmental Conditions | |
| Operating temperature | 0ºC to +60ºC |
| Storage temperature | -40ºC to +70ºC |
| Relative humidity | 5% to 95% non-condensing |
Packaging & Delivery
| Category | International Commercial Terms (Incoterms) | Terms of Payment | Nearest Port |
| LKS Functional Safty PLC | CIF, CFR, DAP | LC, T/T, D/P | Shanghai, Guangzhou, Tianjin |
Related Products
LK Large Scale PLC
LE Compact PLC
HT8001 HMI
MC Motion Controller
