Horizontal Drying Mixer is a multi-function mixer combines mixing, reaction and drying, widely used in industries of food, chemical industries, building materials, lithium battery, etc., during the process of which the liquid needs to be added, and after mixing the liquid needs to be removed or the liquid content is too high so it needs to decrease. The machine is with heating jacket, which can heat the materials by hot water, hot oil, steam and other medium. The entire design is closed, vacuum system are for option to pump out the air to drain the liquid. In addition , there is a dust collecting device, condensing refluxing device, solid-gas separating device, etc., to reduce the raw material consumption. The whole system can be designed with PLC intelligent controlling(such as temperature, vacuum degree, rotation speed, etc.), and with the signal connector to implement remote controlling.
Materials Specific Gravity | ≤3g/cm³ |
Drying temperature | ≤400ºC |
Production Capacity | 50-30,000L |
Application Industry | Suitable for the mixing and drying of starch, lithium battery material, ceramic material, chemical fertilizer, sludge treatment etc industry. |
Applicable Materials | Powder or paste whose specific gravity is under 3g/cm³, and with certain fluidity, such as modified starch, positive pole material of lithium cobalt oxides, white carbon black etc material. |
Plough type agitator used;
All stainless steel materials;
With powder feeding small hopper;
With insulation layer.
With customized powder feeding ports;
With vacuum system
Can be customized with
two side view ports;
With heating coil for drying.
Nice Auxiliary Components:
* Auxiliary components are for option, such as coil pipe steam heating jacket, honeycomb anti-pressure jacket, recycle-medium jacket, real-time sampling valve, high speed fly-cutter, temperature detector, weighting system, dust collecting system, vacuum drying system and etc.
* Spray and atomizing device are for option to spray little liquid which will mix the liquid into powders better. Spraying system consists of pressure source, liquid storage tank, spray device.
* Equipment material can be designed in carbon steel, SS304, SS316L, SS321, other harder alloy agitators can also be used on agitator. Lining of cylinder can be polyurethane or spraying wear-resistant material.
Production Equipment
Five-axis Gantry Machining Center Turning and Milling Center CNC Boring and Milling Machining Center
CNC Vertical Lathe Vertical Machining Center CNC Five-axis Gantry Machining Center