Audited Supplier
KNFT
Hot Water Boiler
Waste Heat
Packaged Boiler
Water Tube
Steam and Water
Forced Circulation
Horizontal Boiler
High Pressure
B
Waste Heat
Power Station
Heat Change Through Pin Tube
Horizontal
Water Tube
kaineng
Wood Case
SGS, BV, GL, LR
Qingdao, China
Product Description
Description:
this boiler is a special design for generator group exhaust gas recovery.this boiler use pin tube as reinforce heat transfer components,which greatly increase the heat transfer area,Meanwhile the gas flow become a strong turbulence during going through the pin tube surface.the advantage of the boiler is simple structure ,high efficiency,long running life,safety and convenient maitain.
Exhaust gas boiler parameter (Boiler customization available):
this boiler is a special design for generator group exhaust gas recovery.this boiler use pin tube as reinforce heat transfer components,which greatly increase the heat transfer area,Meanwhile the gas flow become a strong turbulence during going through the pin tube surface.the advantage of the boiler is simple structure ,high efficiency,long running life,safety and convenient maitain.
Feature:
1,the boiler use pin tube as heat transfer component,which can increase heat transfer area 7-8 times,raise coefficient of heat transfer 2 times.So the heat transfer efficiency is raised 14 times.
2,the boiler has the ability of self-clean.the gas flow become a strong turbulence during going through the pin tube,which make the dust&ash difficult to accumulate on the tube.
3,the basic invest of the boiler is only 50-70% of the ordinary
boiler,cheap and high cost performance.
1,the boiler use pin tube as heat transfer component,which can increase heat transfer area 7-8 times,raise coefficient of heat transfer 2 times.So the heat transfer efficiency is raised 14 times.
2,the boiler has the ability of self-clean.the gas flow become a strong turbulence during going through the pin tube,which make the dust&ash difficult to accumulate on the tube.
3,the basic invest of the boiler is only 50-70% of the ordinary
boiler,cheap and high cost performance.
Exhaust gas boiler parameter (Boiler customization available):
| No. | Item | Parameters |
| 1 | Operating pressure | 1.0MPa |
| 2 | Design pressure | 1.1MPa |
| 3 | Operating temperature(inlet/outlet) ºC | 60/184ºC |
| 4 | Design temperature | 200ºC |
| 5 | Hydraulic test pressure | 1.4MPa |
| 6 | Maximum dimension: length ×diameter | 2885×Φ1525 (mm) |
