Audited Supplier
Hot rolled steel rebar for the concrete pre-stressing is reinforced straight steel bar with high strength and high dimensional accuracy external thread .
This kind of rebar can be connected at any cross section with rebar coupler for anchoring and connection of two rebars.
The reinforcing rebar is widely used in large-scale projects, such as water dams, bridges, highways, railways, power stations, and some other ground anchoring projects. It plays a important role of easy connection and anchoring with strong adhesion, solid stretching and anchoring. It's very convenient for construction work, as well as cost effective for saving steel, area and weight of components.
| bar diameter | 15/17mm, minor dia 15mm and major dia 17mm |
| Max. load | 180KN |
| Length | Any length within L=6 meters |
| Material | 45# steel, equal to AISI 1045 |
| Other sizes | available n request, such as D20mm, D22mm, etc. |
| Part Name | Specification | Weight (kg) | Remark |
Tie-rod | D15 D20 | 1.52 kg/m 2.71 kg/m | L=6m; Special length available upon request. |
Wing nut | D15 D20 | 0.35 0.70 | For tie-rod D15 / D20 |
Super plate | D15 | 1.28 | Used in case of tie-rod and formwork panels are not vertical. |
3-lug wing nut | D15 D20 | 0.97 0.78 | For tie-rod D15; For tie-rod D20 |
Waling plate | 120 x 120 x 6, Φ19 120 x 120 x 8, Φ19 | 0.65 0.85 | For tie-rod and nut D15; galvanized |
Water stopper | D15 D20 | 0.55 0.72 | Used in water resistant wall; With tie-rod D15 / D20 |
Anchor plate | D20 | 0.95 | Embedded in concrete as lost part |
