Audited Supplier
MW5
Below 150°c
150°c-600°c
Above 600°c
DC220V
KMD
Export Wooden Case
CE
Yueyang, Hunan
8505901000
Product Description
Hot selling cast iron ingot lifting electromagnet for steel factory
Profile
MW5 series products are round type magnets, with this structure, it features strong attracting force, deep penetration force, it is an ideal transportation tool. Suitable for lifting and transporting cast ingot, steel ball, pig iron, mechanical chip, various kinds of steel scraps, return scraps, cropping, baling scraps and etc. Suitable for removing large irons in advance in slag disposal process and lifting and transporting iron powder in the coal washery. Two chamber type outlet box with particular extra-thick outlet box fender and anti-twist setting for outlet cables. There are three excitation modes: rated voltage DC220V mode; strong excitation mode; over excitation mode.
MW5 series have normal temperature type, high frequency type, high temperature type, and strong magnet type. For strong magnet type, it can attract force 30% higher than normal type for frequently loading and discharging some light-weight scraps at big capacity melting furnaces. They are especially suitable for feeding during electric steel making process. The products have laready been applied widely in various national steel companies and got good feedback.
MW5-150L type main technical data as below:
MW5 strong magnet type main technical data(rated voltage DC-220V)
Recently years, we have optimized these products on original base, products performance have been reinforced, and we have developed a strong magnetic type for steel scrap. This product can promote attracting force by 25-35%, but its weight only increased guarantee 10-15%. Thus improved working efficiency.
Complete System:
Guide for Model Selection
1,What's the attached material? Choose the suitable series according to the attached material.
2,The specification of material attracted? such as weight,length,width or number.
3,The specification of hoist, such as: tonnage, height and brake type of hook.
4,The application environment, such as temperature of material attached, indoor or outdoor.
5,The cycle duty: when exceed 60%, choose high frequency type.
6, Selection of corollary equipment: cable reel and control cabinet.
Advantage:
MW5 series are suitable for cast ingot, steel ball, pig iron, machine chip, for various kinds of steel scraps, return scraps, cropping, baling scraps, etc. We strongly hope that clients choose KMD magnet liftings as of good quality and service. We have been in this industry over 23 years with massive trusty from old clients.
KMD Introduction:
Established year: 1997
Staffs: 800
Engineer team: 180
Exported countries: 50, including India, Pakistan, Malaysia, Vietnam, Myanmar, Laos, Phillipines, Indonesia, USA, Spain, Turkey, Russia, Ukrain, Saudi Arabia, etc.
Certifications: CE, ISO9001, ISA
Profile
MW5 series products are round type magnets, with this structure, it features strong attracting force, deep penetration force, it is an ideal transportation tool. Suitable for lifting and transporting cast ingot, steel ball, pig iron, mechanical chip, various kinds of steel scraps, return scraps, cropping, baling scraps and etc. Suitable for removing large irons in advance in slag disposal process and lifting and transporting iron powder in the coal washery. Two chamber type outlet box with particular extra-thick outlet box fender and anti-twist setting for outlet cables. There are three excitation modes: rated voltage DC220V mode; strong excitation mode; over excitation mode.
MW5 series have normal temperature type, high frequency type, high temperature type, and strong magnet type. For strong magnet type, it can attract force 30% higher than normal type for frequently loading and discharging some light-weight scraps at big capacity melting furnaces. They are especially suitable for feeding during electric steel making process. The products have laready been applied widely in various national steel companies and got good feedback.
MW5-150L type main technical data as below:
| Model | Cold-state power(kW) | Current A(cold/hot state) | overal dimension(mm) | Mass(kg) | lifting capacity(kg)(cold/hot state) for steel ball | lifting capacity(kg)(cold/hot state) for casting ingot | lifting capacity(kg)(cold/hot state) turnings |
| MW5-150L/1 | 15.6 | 70.9/46.1 | 1500 | 2830 | 11000 | 1900/1500 | 1100/900 |
| MW5-150L/1-75 | 11.3 | 51.4/33.4 | 1500 | 3180 | 11000 | 1900/1500 | 1100/900 |
| MW5-150L/2 | 11.3 | 51.4/33.4 | 1500 | 3200 | 11000 | 1900/1500 | 1100/900 |
MW5 strong magnet type main technical data(rated voltage DC-220V)
| Model | Voltage | Cold-state power(kW) | Current A(cold/hot state) | lifting capacity for steel ball(kg) | lifting capacity for casting ingot(kg) | lifting capacity for turnings(kg) | overal dimension(mm) | Mass(kg) |
| MW5-165L/1-QC | 400/200 | 17.6 | 80/52 | 13500 | 2650/2100 | 1500/1300 | 1650 | 4250 |
| MW5-180L/1-QC | 400/200 | 22.8 | 104/67.4 | 16000 | 3100/2400 | 1900/1600 | 1800 | 5600 |
| MW5-210L/1-QC | 400/200 | 32.6 | 148/96 | 23100 | 4000/3200 | 2600/2180 | 1980 | 8300 |
| MW5-240L/1-QC | 400/200 | 43 | 195/127 | 28600 | 5500/4400 | 3360/2650 | 2200 | 10800 |
Recently years, we have optimized these products on original base, products performance have been reinforced, and we have developed a strong magnetic type for steel scrap. This product can promote attracting force by 25-35%, but its weight only increased guarantee 10-15%. Thus improved working efficiency.
Complete System:
Guide for Model Selection
1,What's the attached material? Choose the suitable series according to the attached material.
2,The specification of material attracted? such as weight,length,width or number.
3,The specification of hoist, such as: tonnage, height and brake type of hook.
4,The application environment, such as temperature of material attached, indoor or outdoor.
5,The cycle duty: when exceed 60%, choose high frequency type.
6, Selection of corollary equipment: cable reel and control cabinet.
Advantage:
MW5 series are suitable for cast ingot, steel ball, pig iron, machine chip, for various kinds of steel scraps, return scraps, cropping, baling scraps, etc. We strongly hope that clients choose KMD magnet liftings as of good quality and service. We have been in this industry over 23 years with massive trusty from old clients.
KMD Introduction:
Established year: 1997
Staffs: 800
Engineer team: 180
Exported countries: 50, including India, Pakistan, Malaysia, Vietnam, Myanmar, Laos, Phillipines, Indonesia, USA, Spain, Turkey, Russia, Ukrain, Saudi Arabia, etc.
Certifications: CE, ISO9001, ISA
