Audited Supplier
DC-COM10-2000 2/1 H4
Lifetime Paid Warranty.
1 Year
Lifting Platform, Small Crane
Chain Hoist
Chain
2~8m/min
4m
2
ISO9001:2000
New
Blue
Carton Packaging
China
84251100
Product Description
DC-Com chain electric hoist is the main model of fourth-generation chain electric hoist. Its design performance is suitable for most industrial occasions, especially for occasions where the general working frequency and speed requirements are not too high. DC-Com is an extremely cost-effective chain hoist. The DC-Com hoist can be used alone as a fixed hoist or combined with a light crane or an I-beam/H-beam crane to achieve more uses.
Lifting capacity: 125kg - 2000kg
Standard dual-speed lifting
Standard upper and lower limits
24V low voltage, intelligent control
The length of the hand-held pendant cable can be freely adjusted
Motor protection level: IP55
Gearbox, brake and clutch are maintenance-free for 10 years
Plug and play, convenient for installation and maintenance
Small size, light weight and compact structure
The manual running trolleys U11/U22/U34 are specially designed load trolleys for DC hoists to run on I-beam tracks or H-beam tracks. Their load capacities are 1100kg, 2200kg and 3400kg respectively.
Lifting capacity: 125kg - 2000kg
Standard dual-speed lifting
Standard upper and lower limits
24V low voltage, intelligent control
The length of the hand-held pendant cable can be freely adjusted
Motor protection level: IP55
Gearbox, brake and clutch are maintenance-free for 10 years
Plug and play, convenient for installation and maintenance
Small size, light weight and compact structure
The manual running trolleys U11/U22/U34 are specially designed load trolleys for DC hoists to run on I-beam tracks or H-beam tracks. Their load capacities are 1100kg, 2200kg and 3400kg respectively.
- Universal trolley wheels can run on I-beam tracks or H-beam tracks.
- Can be suitable for tracks of different widths up to 310mm.
- U11 and U22 are standardly equipped with high-strength nylon wheels, with light weight, small running resistance and less track wear.
- U34 is standardly equipped with ductile iron wheels. U11 and U22 can be optionally equipped with ductile iron wheels for large bearing capacity.
- Steel guide wheels are provided on the side for smoother running.
- Equipped with an anti-drop device for high safety.
- Can be directly equipped with an E11/E22 drive motor to become an electric running trolley.
The drive motors E11/E22/E34 can be directly installed on the manual running trolley to become an electric running trolley, making lifting and handling easier and more stable. - Can be directly installed on the U11/U22/U34 manual trolley, very convenient.
- IP55 protection level.
- Working environment temperature: -20 degrees to +40 degrees.
- With motor temperature monitoring.
- All electrical connections are plug-in type for convenient installation.
- The circuit board integrates walking limit and fast/slow speed conversion switch control functions.
- The E22 drive motor can also be equipped on the RF125 trolley of the crane.
- Power is directly taken from the DC hoist without additional power distribution.
- Running speed and acceleration/deceleration parameters can be set through the hand-held pendant.
- Built-in load anti-sway program that can be *** as needed.
- When equipped with a DCS-PRO hoist, walking frequency conversion stepless speed regulation can be achieved.
DC: YOUR BENEFITS
• Individual customer solutions from our
comprehensive product
