Audited Supplier
Hot selling new energy vehicle two wheeler motor rotor balancing machine
A2WZ2 automatic balancing machine is used for workpiece dynamic balance test and automatic drilling to remove weight. The measurement control system integrates the functions of measurement, control, and calculation, and has functions such as automatic measurement and positioning.
No. | Specifications | Parameters |
1 | Weight of armature (Kg) | 3kg |
2 | Diameter of armature (D) | 50~100mm |
3 | Length of armature (L) | 100~220mm |
4 | Drilling diameter | 5mm |
5 | Balancing motor power | 0.4KW(servo motor) |
6 | Min. achievable residual unbalance (Emar) | ≤0.15g.mm/kg(Per plane) |
7 | Cycle time | 120 s(depends on the rotor initial volume) |
8 | Unbalance reduction ratio | ≥90% |
9 | Operating air pressure | 0.45~0.6MPa |
10 | Operating voltage | AC:380V/3-phase/50Hz(standard) available for customization |
11 | Protection | Phase sequence protection, overload protection, air pressure monitoring |
Professionally designed swing frame, effectively transmits mechanical force, is sturdy and reliable, has low vibration damping and good rigidity
High sensitivity sensor, good linearity, durable and reliable
Ring belt drive structure, higher measurement accuracy, more convenient to use
Advanced electrical measurement system, friendly man-machine interface, full-featured Modular design for a wide range of applications
Automatically stop at the unbalancing position and do corrention In addition to manual loading and unloading, the balance correction is completed at one time.
The machine is equipped with an automatic chip suction device, which can not only ensure the cleanliness of the machine, but also improve the service life of the machine.
The electrical interlocking safety door device greatly improves the reliability of the machine.
