Audited Supplier
Product Name : Hot and COLD output RO water purifier system for home use office use
This RO system is combining with the following features:
1) Pure water flow rate 0.27 Liter/min, inside tank 10L, heat tank 1.5L, cool tank 1.5L
2) Slim body, looks royal to place home
3) 5 stages filters, PP+ GAC+ PP+RO 2012-100+ post UDF
4) LED display optional
5) Quality pump and adapters
Using the current most advanced international RO technology, standard configuration is as follows:
A. First is a 10-inch 5-micron PP filter:
The aperture of the PP filter is 5 microns, can effectively filter rust, sand, other larger particles and solid impurities in water.
B. Second is a 10-inch 85C granular activated carbon filter:
It can effectively adsorb chlorine, humus, disinfection by-products, odors, colors, and other materials.
C. Third is a 10-inch 1-micron PP filter or CTO filter:
It can further remove small particles in the water, suspended solids, colloids, etc. CTO filter can further absorb free chlorine, humus, disinfection by-products, odors, colors and other materials.
D. Fourth stage is RO membrane:
Aperture is 0.0001 micron (0.1 nm), reduces bacterium by 4,000 fold, reduces viruses by over 200 fold, so you can effectively remove bacteria, viruses, heavy metals, pesticide residues, and other harmful substances from the water.
E. The fifth-stage is a post-activated carbon filter:
Regulates water taste, keeps water fresh.
Note: This machine also has an optional configuration:
Pretreatment Filter: KDF two stage filter, KDF three stage filter, sintered activated carbon filter
Post-filter: Alkaline filter, infrared mineralization activated carbon filter, alkaline sterilization filter, sterilizing filter
| Model | RO-100PCH8 |
| Voltage | AC 110V/220V 50HZ |
| Power Rating | 28.8W |
| Suitable Water Pressure | 0.1MPa~0.35Mpa |
| Operating Pressure | 0.4Mpa~0.6Mpa |
| Inlet Temperature | 5-38ºC |
| Maximum Inlet Water TDS Value | ≤1000PPM |
| Maximum Daily Water Production Volume | 100 Gallons, approximately 378.5 Liters |
| Flushing Method | Auto flush |
| Electric Shock Protection Type | Type II |
| Suitable Water Quality | Municipal tap water meeting the GB5749-2006 standards |
FAQs on Reverse Osmosis RO drinking water system OEM manufacturing
Q1: Why Reverse Osmosis drinking water system is the best choice for drinking water system?
A1: Reverse Osmosis system is the most popular drinking water filtration technology, as the RO membrane has the filtration preciseness of 0.0001 micron, which can effectively get rid of bacteria, virus, heavy metals and other contaminants from drinking water, it is the safest water filtration technology to get safe drinking water.
Q2: If I want to have mineral water or alkaline water, how can I do to get it?
A2: By adding post inline filter of mineral cartridge or mild alkaline cartridge can change the pH and the water quality from the RO water, we can provide more diversified options of water filters.
Q3: If I am located in the hard water area, do I need to have a water softener before teh RO system?
A3: If you are located at the high water hardness area, water softener or resin water filter is avaliable for making the right water purifier solution for you.
Q4: Does the RO water system has a feed water pressure limit? if I am located in Rural area or with zero feed water pressure, what can I do?
A4: Yes, the regular RO system requires a 20psi feed water pressure, which we use RO boost pump for the RO system. If you are located in Rural area or with zero pressure feed water supply, we can replace the RO boost pump into self-priming pump for the RO system. If you have a more sufficient feed water supply higher than 40psi, we can provide you pumpless RO system.
Q5: What type of RO system is available in terms of the external structure?
A5: Classical 5-stages undersink RO system, cabineted countertop RO system, commercial RO system, and RO system with private molded cabinet is avaliable, ODM RO system is welcome.
Q6: Does each RO system has a micro controller system? Can we edit the controlling function?
A6: Some model of the RO system has micro controller system, and some don't, yes, OEM functions for rinsing and controlling service is avaliable on request.
Q7: Do you provide sample for test before making the mass order?
A7: Yes, we provice OEM sample based on specific request, formal test report will be sent along with the sample, a delivery schedule will be given for mass production, sample will be charged with delivery fee.
Q8: What is the warranty of the RO system?
A8: All RO system is with basic 1 year quality warranty on its parts and accessories, free parts and components will be offered for replacement during the warranty period upon collecting the warranty proof.
