Hpsp-1000 SMPS with Pfc and Parallel Function 1000W

Features:
·Universal AC input / Full range
·Built-in active PFC function, PF>0.95
·Protections: Short circuit / Over load / Over voltage / Over temp.
·Built-in constant current limiting circuit
·Forced air cooling by built-in DC fan
·Current sharing up to 2 units or 2000W
·Built-in remote ON-OFF control and remote sense function
·Built-in active current sharing and parallel function
·3 years warranty
·Dimension: 278*129*127mm (L*W*H)

Specification:

1) INPUT
·Voltage Range: 90-264VAC, 127-370VDC; 47-63Hz
·Power Factor: PF>0.95/230VAC PF>0.95/115VAC at full load
·AC Current: 14A/115VAC 7A/230VAC
·Inrush Current: Cold start 40A/115VAC 70A/230VAC
·Leakage Current: <2mA/240VAC

2) PROTECTION
·Over Load: 115%-140%; Constant current limiting, recovers automatically after fault condition is removed.
·Over Voltage: 115%-135%; Shut down o/p voltage, re-power on to recover.
·Over temp.: 95ºC(TSW1) Detect on the heatsink of PFC MOSFET, 90ºC(TSW2) Detect the winding of output choke; Shut down o/p voltage, recovers automatically after temperature goes down.

3) ENVIRONMENT
·Working Temp. & Humidity: -10ºC~+65ºC; 20%~90% RH.
·Storage Temp. & Humidity: -20ºC~+85ºC; 10%~95% RH.
·Vibration: 10~500Hz, 2G 10min./1 cycle, period for 60min, each along X, Y, Z axes.

4) SAFETY STANDARDS
·Withstand Voltage; I/P-O/P: 3KVAC; I/P-FG: 1.5KVAC; O/P-FG: 0.5KVAC
·Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG: 100MΩ/500VDC
·Safety Standards: Design refer to UL60950, TUV, EN60950
·EMC Standards: Design refer to EN55022, EN61000-3-2,-3, EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024

5) Type No | Output | Tol. | R&N | Effi.

HPSP-1000-5 | 5V, 145A | ±6% | 100mV | 77%
HPSP-1000-12 | 12V, 75A | ±3% | 150mV | 84%
HPSP-1000-13.5 | 13.5V, 67A | ±2% | 150mV | 84%
HPSP-1000-15 | 15V, 60A | ±2% | 150mV | 84%
HPSP-1000-24 | 24V, 37.6A | ±1% | 150mV | 86%
HPSP-1000-27 | 27V, 33.6A | ±1% | 150mV | 86%
HPSP-1000-48 | 48V, 19A | ±1% | 200mV | 86%