Audited Supplier
HXM2500
24 Hours Service Online
2 Years
Plastic Injection Molding Machine
Horizontal
PS, ABS, PP, PE, HDPE, PA, EVA
Screw Type
Hydraulic & Mechanical
Automatic
Computerized
CE, ISO9001:2008
28493 Cm3
25928 G
1850*1700 mm
1900 mm
HIGHSUN
Standard Package
19.50x4.00x5.20
China
8477101090
Product Description
1.Picture
Product Advantages:
a. Super energy saving
Output power varies with the load, and no energy is wasted. In the holding pressure phase, the servo motor will reduce speed, with low energy consumption; during the cool-down period, the motor does not work, with zero power consumption. Compared with the ordinary injection molding machines, it can save 20%-80% of the power.
b. Hiigh precision and high stability
Equipped with the precise pressure sensor and rotary encoder, it can respectively monitor and feed back on flow and pressure. Based on the feedback, the high performance synchronous servo motor will adjust flow and pressure accordingly by changing the speed and torque. The closed-loop control can ensure the stability of product quality.
c. High response and high efficiency
The driving system responses with high sensitivity . It takes only 0.05 seconds to reach maximum value. The response speed is much faster than the ordinary injection molding machines. In that way, it significantly shortens the cycle time and increases the production efficiency.
| MODEL:HXM2500 | ||||||
| TECHNICAL PARAMETER TABLE | A | B | C | |||
| INJECTION UNIT | SCREW DIAMETER | mm | 170 | 185 | 200 | |
| SCREW L/D RATIO | L/D | 23 | 22 | 21 | ||
| INJECTION CAPACITY IN THEORY150130112882 | cm3 | 24059 | 28493 | 33300 | ||
| INJECTION WEIGHT(PS) | g | 21894 | 25928 | 30303 | ||
| oz | 772.2 | 914.5 | 1068.8 | |||
| INJECTION PRESSURE | MPa | 186 | 157 | 134 | ||
| INJECTION RATE | g/s | 1409 | 1669 | 1951 | ||
| PLASTICIZING CAPACITY | g/s | 127 | 170 | 220 | ||
| SCREW SPEED | rpm | 65 | ||||
| CLAMPING UNIT | CLAMPING FORCE | KN | 25000 | |||
| MOVING MOULD-PLATE STROKE | mm | 1900 | ||||
| MAX. MOULD HEIGHT | mm | 1800 | ||||
| MIN. MOULD HEIGHT | mm | 800 | ||||
| SPACE BWTWEEN TIE-BARS (W×H) | mm | 1850*1700 | ||||
| HYDRAULIC EJECTOR FORCE | kN | 520 | ||||
| HYDRAULIC EJECTOR STROKE | mm | 450 | ||||
| EJECTOR NUMBER | n | 33 | ||||
| OTHERS | PUMP PRESSURE | MPa | 17.5 | |||
| MOTOR /DRIVING POWER | KW | 47+47+47+47 | ||||
| HEATING CAPACITY | KW | 170 | ||||
| MACHINE DIMENSION (L×W×H) | m | 19.5*4*5.2 | ||||
| MACHINE WEIGHT | t | 175 | ||||
| OIL TANK CAPACITY | L | 3700 | ||||
a. Super energy saving
Output power varies with the load, and no energy is wasted. In the holding pressure phase, the servo motor will reduce speed, with low energy consumption; during the cool-down period, the motor does not work, with zero power consumption. Compared with the ordinary injection molding machines, it can save 20%-80% of the power.
b. Hiigh precision and high stability
Equipped with the precise pressure sensor and rotary encoder, it can respectively monitor and feed back on flow and pressure. Based on the feedback, the high performance synchronous servo motor will adjust flow and pressure accordingly by changing the speed and torque. The closed-loop control can ensure the stability of product quality.
c. High response and high efficiency
The driving system responses with high sensitivity . It takes only 0.05 seconds to reach maximum value. The response speed is much faster than the ordinary injection molding machines. In that way, it significantly shortens the cycle time and increases the production efficiency.
