Audited Supplier
Injection molding machine
24 Hours Service Online
24 Months
Plastic Injection Molding
Horizontal
Thermoplastic
Screw Type
Hydraulic & Mechanical
Automatic
Computerized
CE, ISO9001:2008
Servo Energy Saving
After Sales Service
According to Countries
Malaysia,Russia,Turkey,Uzberkistan
New
11.2ton
HIGHSUN
Standard Packing
7.20x2.36x2.18M
China
8477101090
Product Description
HIGHSUN PVC fitting machine, clamping force:218-1100T
- Adopt the special designed screw & barrel for PVC material, install the air fan for cooling barrel, to avoid the material overheating and coking;
- Increased bigger grade oil motor to facilitate PVC raw material plasticizing and molding;
- Enlarge the width of clamping unit cover sheet, to suit PVC fitting molds (core puller cylinder) installation convenience;
- Supply with special technical solution for PVC injection, not only modify the screw & barrel like others, but also the special solution contains complete hydraulic system and injection unit.
| HX(*)330PVC | ||
| Injection Unit | ||
| Screw diameter | mm | 65 |
| Screw L/D ratio | L/D | 21 |
| Injection capacity in theory | cm³ | 1062 |
| Injection weight(PVC) | g | 1274 |
| Injection pressure | MPa | 162 |
| Injection rate | g/s | 342 |
| Plasticizing capacity | g/s | 58 |
| Screw speed | rpm | 160 |
| Clamping Unit | ||
| Clamping force | KN | 3300 |
| Moving mould-plate stroke | mm | 660 |
| Max.Mould height | mm | 750 |
| Min.Mould height | mm | 250 |
| Space between tie-bars | mm | 720x670 |
| Hydraulic ejector force | KN | 125 |
| Hydraulic ejector stroke | mm | 180 |
| Ejector number | n | 13 |
| Other | ||
| Pump pressure | MPa | 16 |
| Motor/Driving power | KW | 37 |
| Heating capacity | KW | 20.35 |
| Machine dimension | m | 7.20x2.36x2.18 |
| Machine weight | t | 11.2 |
| Oil tank capacity | L | 680 |
