Audited Supplier
HY-782PS
1 Years
Slip Resistance
>1000KN
1
Electronic Load
Dynamic Load
Digital
Computer Control
100-500Kg
AC220V
hengyu
100X65X170cm
China
Product Description
Through different media (wooden board, PVC, ceramic tile or specified), apply the specified load, set the specified friction times and speed. To measure the friction behavior of soles to determine the slip resistance of shoes
According to the standard:
Our company is the drafting unit of the national standard "GB/T3903.6-2017 Footwear - Test method for whole shoes - Anti-skid performance"
GB/T28287, EN ISO13287, SATRATM144, ASTM F2912
| 1. Maximum vertical pressure: 1000N 2. Maximum horizontal pressure: 1000N 3. Sliding speed: (0-0.3±0.03) m/s adjustable 4. Skateboard stroke: 0-200MM 5. Vertical sensor: 2KN one 6. Level sensor: 2KN two 7. Sensor accuracy: ±0.5% 8. Vertical pressure control accuracy: ±1% 9. Vertical pressure control time: 0-set value, less than 0.2 seconds 10. Planetary reducer: Japan Xinbao PLF80 reduction ratio 1:9 11. Precision linear guide rail: Taiwan Shangyin BRH15A2L703N 12. Brake clutch: EFUL-Z-050 Taiwan Yanxin 13. Transmission timing belt: 5MX2300 South Korea Samsung 14. Displacement sensor: Japan Rhine 1000P. Accuracy 0.001MM 15. Working table: 600X320MM (made of aluminum alloy) 16. Test plate: EN13287, TM144 standard ceramic tile, stainless steel plate 17. Control motor: Japanese Panasonic MHMD082G1U 750W servo motor 18. Pressurization system: Japan SMC proportional valve control, computer setting, automatic pressurization. 19. Taiwan industrial computer, 17-inch monitor, laser printer set. 20. Sample loading rack: made of 6063 aluminum alloy, 21. Control software: a set of anti-skid special software developed by Hengyu Company. 22. Force cylinder: Japan SMC63X200 standard cylinder is adopted. 23. Protection device: leakage protection, pressure overload protection, air buffer stroke limit protection. Emergency stop switch protection. 23. Volume: 100X65X170cm 24. Weight: 300kg 25. Power supply: AC220V 50HZ 1KW |
1. A copy of the instrument manual.
2. A warranty card for the instrument.
3. A calibration report of the national standard third-party tester
4. A laser printer
5. A shoehorn
6. One silent air compressor
7. A shoe tree puller
8. A bottle of sodium lauryl sulfate
9. A set of special tools.
10. One industrial computer
11. One wireless keyboard and one wireless mouse
12. Clean and dry an air gun.
13. EN13287 standard rubber test frame.
14. Heel test stand
15. One set of foldable shoe last (optional accessory).
16. 5 sheets of 200#, 400#, 600# sandpaper.
17. One sanding block for sole
18. A batch of interface fixed blocks (matched with the standard interface quantity)
19. Two angle blocks, one for 5 degrees and one for 7 degrees.
20. A set of 4 outsole test prosthetic feet (optional ISO13287 appendix)
21. Three pieces of TM144 tiles (optional)
22. One piece of ISO13287 ceramic tile (optional)
23. A standard stainless steel plate (optional)
24. A bottle of standard glycerin with a viscosity value of 200. (optional)
25. GB/T3903.6 standard marble board, standard wooden floor, standard glass board (optional)
