Audited Supplier
GP45-2
Free Commissioning and Training on Site
1 Year or 2000 Working Hours
CE, RoHS, ISO 9001:2000, ISO 9001:2008
New
AC Motor
<100mm
<100m
Button Bit
Feeding+Rotating+Percussion
45mm-89mm
4500mm
Epiroc or Montabert
Yanmar
Weg
6500mm
GRANDPLAN
Standard Export Packing
40' HQ container
China
8430490000
Product Description
Hydraulic double boom drilling jumbo with hanging basket
Suitable for 96m2 cross section
Specifications
HC95LMW Drifter MONTABERT FRANCE
HT series Feed
Boom
Hydraulic system
Air system
Water system
Diesel engine
Carrier
Electrical system
Size & weight
Hole drilling coverage
Main components configuration table
Suitable for 96m2 cross section
SpecificationsHC95LMW Drifter MONTABERT FRANCE
| Model | HC95LMV |
| Shank | T38/R38 |
| Height over drill center | 86mm |
| Impact power | 21kw |
| Impact rate | 54-62 Hz |
| Hydraulic system pressure | 180-200bar |
| Rotation system | Independent rotation |
| Rotation speed max. | 296Rpm |
| Rotation torque max. | 764N.m |
| Air consumption for lubrication(at 3bar) | 300L/min |
| Water consumption | 60-120L/min |
| Weight | 183 Kg |
| Sound level | <105dB(A) |
HT series Feed
| Feed | HTA | |
| Total Length | 6500mm | |
| Drill steel length | 4915mm | |
| Hole depth | 4500mm | |
Boom
| Feed compensation | 1600mm |
| Drilling boom extension | 1600mm |
| Parallel holding | Complete |
| Feed roll-over | 360° |
| Boom extension | 1450mm |
| Drilling Boom lifting angle, max. | +60°/-30° |
| Boom swinging angle, max. | ±35° |
Hydraulic system
| Hydraulic pumps group | 2 sets of independent system respectively for each drilling boom | |
| Pump unloading start | ||
| System pressure, max | 230 bar | |
| Hydraulic oil tank volume | 200 L | |
| Oil temperature gauge | ||
| Water cooled oil cooler | ||
| Filtration fineness | 20μm | |
| Mineral based hydraulic fluid | ||
Air system
| Max. capacity | 1.0 m3/min(at 7bar) |
| Air pressure gauge |
Water system
| Water pump | Water booster pump CDL8-16 |
| Max capacity at 13.5 bar | 133 L/min |
| Min water inlet pressure | 2 bar |
Diesel engine
| CHINA WEICHAI Diesel engine | |
| Rated power(@2300rpm) | 103kw |
| Torque(1600-1800rpm) | 510Nm |
Carrier
| Articulated steering | ±35° |
| Fixed driving seat | |
| 4 wheels drive | |
| Hydrostatic power steering system | |
| Front axle | CLG |
| Rear axle | CLG, ±8° oscillation angle |
Electrical system
| Total installed power | 163 Kw |
| Main motor power | 75X2 Kw |
| Voltage | 380 V(or customized) |
| Frequency | 50 Hz(or customized) |
Size & weight
| Length | 15600mm |
| Width | 2500mm |
| Cabin Height | 2610mm-3310mm |
| Weight | 29500Kg |
| Ground clearance | 463mm |
Hole drilling coverage
Main components configuration table
| No. | Name | Specification | Manufacturer |
| 01 | Drifter | HC95LMW | MONTABERT, FRANCE |
| 02 | Master pump | DANFOS, USA | |
| 03 | Master valve | BREVINI | |
| 04 | Electric motor | 75Kw | WEG |
| 05 | Diesel engine | CUMINS | |
| 06 | Tyre | 16.00-25 | CHINA |
| 07 | Water pump | CDL8-16 | CHINA |
| 08 | Air compressor | 1m³/min | CHINA |
| 09 | Hydraulic oil cooler | CHINA | |
| 10 | High pressure assembly | CHINA | |
| 11 | Cable | 3×120mm²+1×35mm² | CHINA |
| 12 | Drill bit&rod | CHINA |
