ID Mounted Flange Facing Machine

The ID mounted flange facing machine is designed for the Flange facing, seal groove, serrated finish, weld prep. and counterboring. with the latest line and ball screw technology, the equipment adopts the modular design concept as a whole. Each step of design takes the field processing as the starting point. This machine is widely used in the flange connecting of Petroleum, chemical, natural gas and nuclear power. With the light weight,this machine is helpful for the on-site maintance. It ensures the high security and efficiency. 

An internally mounted flange facing machine for flange facing, seal grooves, weld preparation and counter boring.

performs: stock finish, smooth finish, gramophone finish, on flanges, valve seats and gaskets.

High quality finish can be achieved. The feed of cut is automatic from the o/d. inwards.

Standard stock finishes carried out with step: 0.2 - 0.4 -0.6 - 0.8 mm.

Tech specification:


FEATURES 
 1,light weight, easy to carry, fast installation and easy to use; 
 2,Stock finish, smooth finish, gramophone finish, on flanges, valve seats and gaskets. 
 3,Boring and milling tools are optional 
 4,Driven motor:Pneumatic, NC driven, Hydraulic driven 
 5,Latest linear technology for durability and repeatable accuracy 
 6,Standard stock finishes carried out with step: 0.2 - 0.4 -0.6 - 0.8 mm

POWER SUPPLIES

 Pneumatic:
Air requirement:1500-3000L/min @0.63-0.8Mpa 
Power:2HP,3HP,4HP 
Double motor for big model or heavy duty


NC:
Electric requirement: 230V 1PH 50/60Hz;
380V 3PH 50/60Hz
Power:2.0KW or 3.0KW
Double motor for big model or heavy duty


Hydraulic:
Hydraulic requirement:28-50L/min @13Mpa
Electric requirement: 380V 3PH 50/60Hz
Rated Pressure:13MPa
Rated flow:28L/min
Max.Torque:380NM


 

Insert style Tooling

Material:Holder HSS ; 
Insert: HSS-Co or Carbide 


Type:Grooving,Facing,

Machine process surface  show:


Company introduction: