Audited Supplier
Aluminum Alloy Ex Proof Junction Box Cable Terminal Box Ip65 Terminal Junction Box
Explosion Proof Junction Box Details
1. Aluminum alloy shell. Anti-corrosion: The shell is made of aluminum alloy die-casting and the surface is high-pressure electrostatic spray, which has good anti-corrosion effect and long service life.
2. A variety of import and export methods to meet your various wiring needs
3. National standard G thread: The threaded thread is tapped to process the fine thread connection and smoothly
Application
Widely used in petroleum, chemical, warehouse, food, pharmaceutical and other factories and enterprise line pipes;
explosive gas mixture dangerous environment zone 1 and zone 2 explosive gas mixture IA.IIB, IC temperature group T1-T6 strong acid, strong alkali, salt, ammonia , Chloride ion corrosion, water, dust, humidity and other environments.
1. Applicable to hazardous locations in Zone 1 and Zone 2.
2. Applicable to the explosive gas environment of IIA, IIB, and IIC, and the temperature group is T1-T6
technical parameter
3. Executive standard: GB3836.1-2000, GB3836.2-2000, GB3836.3-2000, IEC60079
4. Rated voltage: 220/380VAC/50Hz
5. Rated current: 20A
6. Anti-corrosion grade: WF2
7. Material: cast aluminum, stainless steel
8. Applicable: It can be used for steel pipe wiring or direct cable crossing
9. Product shelf life: one year
| Model No. | CH |
| Ex mark | DIPA20TA, T6 |
| Protection | IP65 |
| Conduit Entries | G 3/4" |
| Lamp Wattages | Thread size |
| G1/2", G3/4". G1 | |
| Voltages | 380V 50/60 Hz |
| Housing Material | Die-casting low-copper aluminum with epoxy coated |
| Cable Outer Diameter | Pipe Thread | Total Length | Shell Ring Diameter | Flat cover height | Height of hanging cover |
| 8~10mm | G1/2" | 163 | 110 | 65 | 110 |
| 8~14mm | G3/4" | 163 | 110 | 65 | 110 |
| 12~18mm | G1" | 163 | 110 | 65 | / |
| 15~23mm | G1 1/4" | 185 | 110 | 80 | / |
| 18~30mm | G1 1/2" | 185 | 110 | 80 | / |
| 25~38mm | G2" | 225 | 120 | 98 | / |
1. How can we guarantee quality?
Always a pre-production sample before mass production.
Always final Inspection before shipment.
We offer 2-5 years warranty to our products.
2.Do you have any MOQ limit for light order?
MOQ, 1pc for sample checking is available.
3. Can you accept put my logo on light product?
Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
4.What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW.
Accepted Payment Currency: USD,GBP,CNY.
Accepted Payment Type: T/T,L/C.
Language Spoken: English,Chinese
5.Warranty
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%. Secondly,
during the guarantee period, we will send new lights with new order for small quantity. All products have been tested before the shipment and it was packaged in good condition.For defective batch products,
Please tested the products at first before you assemble it, if any problem here, please inform us within 3 days of receipt. We can arrange the replacement for you if the situation is confirmed.
