Audited Supplier
IPS 320*480 ILI9488 high brightness sunlight readable 2000nits HVGA 3.5 inch tft lcd screen lcd display oem
H35J4502 is a 3.5inch LCD display in Italy display module with optional resistive touch screen and capacitive touch screen control with a resolution of 320×480 pixels. This size TFT LCD monitor is portrait mode, TFT panel adopts IPS panel, Left: 80/Right: 80/ Top: 80/ Bottom: 80 degrees (typical). Optional RTP or CTP.
This H35J4502 module has built-in ST7796S controller IC, supports RGB (18bit) interface, the power supply voltage (VCC) range is 3.0V to 3.6V, the brightness is 480 nits (typ), and the contrast ratio is 800:1. The module is Ideal for industries such as beauty equipment, communication equipment, etc. The module can operate from -20°C to +70°C; its storage temperature range is -30°C to +80°C
DRAWING
General Specifications
| Item | Contents | Unit |
| Size | 3.5 | inch |
| LCM Dimension | 54.48(W)* 84.71(H) * 2.3(T) | mm |
| LCD Active Area | 48.96 * 73.44 | mm |
| Number Of Dots | 320×480 | pixel |
| LCD Type | a-Si TFT | |
| Viewing Direction | IPS | |
| Driver IC | ST7796S | |
| Interface Type | RGB(18bit) | |
| Operating Temperature | -20ºC~ 70ºC | |
| Storage Temperature | -30ºC~ 80ºC | |
| Backlight Type | 6 LEDs | |
| Brightness | 480 | cd/m2 |
Interface
LCM PIN Definition
| NO. | Symbol | Description |
| 1 | GND | Ground |
| 2 | LEDA | BACKLIGHT ANODE |
| 3 | LEDA | BACKLIGHT ANODE |
| 4 | LEDK | BACKLIGHT CATHODE |
| 5 | LEDK | BACKLIGHT CATHODE |
| 6 | GND | Ground |
| 7 | GND | Ground |
| 8 | VCC | POWER SUPPLY |
| 9 | IOVCC | I/O POWER SUPPLY |
| 10 | RESET | Reset pin |
| 11 | VSYNC | Frame Synchronizing Signal |
| 12 | HSYNC | Line Synchronizing Signal |
| 13 | GND | Ground |
| 14 | DOTCLK | Dot Clock Signa |
| 15 | GND | Ground |
| 16 | DE | Data Enable Signal |
| 17-34 | DB17-DB0 | Data Bus |
| 35 | SDO | Serial Data Output |
| 36 | SDI | Serial Data Input |
| 37 | RD | Read signal, rising-edge-active. |
| 38 | WR/SCL | Write signal, rising-edge-trigger./Serial Clock |
| 39 | D/CX | Data/Command registor selection. |
| 40 | CS | Chip Select |
| 41 | TE | Frame mark. |
| 42 | XR | Touch Panel Right |
| 43 | YD | Touch Panel Down |
| 44 | XL | Touch Panel Left |
| 45 | YU | Touch Panel Up |
ABOUT US
SGS Certification
Experimental equipment
Q: How can I get some samples?
A: We don't provide free one, but we can have a discount when you reorder according to different quantity, and you will win at least 3% discount.
Q: What is the MOQ?
A: It depends on different products. Please keep in touch with sales to confirm the MOQ.
Q: How do you control quality?
A: All materials we purchase for making any orders are high quality and RoHS compliant, and Control quality with ISO 9001:2001 management system.
Advance inspection instrument and equipment to ensure 100% inspection for each and every piece before shipment.
Q: Does your product have any warranty?
A: Yes, we offer 12 months warranty for our products.
Q: What's your payment method?
A: Payment: T/T, Paypal, Western Union, etc.
For samples: payment in advance.
For mass production: 30% deposit and 70% balance before shipment.
Q: Do you offer custom solution?
A: Yes, we can offer custom solution if standard products couldn't meet buyer' requirements.
