Audited Supplier
| Description | Unit | NKE90Series |
| Tare weight | kg | 34000 |
| Payload | kg | 56000~70000 |
| G.V.W | kg | 90000~104000 |
| Wheelbase | mm | 4050+1550 |
| Wheel track(F/R) | mm | 2790/2605 |
| Dimension | mm | 9750*3600*4100 |
| Lifting Angle | ° | 48 |
| Standard/Pile Capacity | m3 | 34/39 |
| Turning Radius | mm | <12000 |
| Tire Size | m | 14.00R25 |
| Ground Clearance | mm | 380 |
| Gear Ratio | 14.298 | |
| Axles | 3 | |
| Driving Type | 6*4 | |
| Axle Loading Front/Middle/Rear | t | 20+35+35 |
| Rated Power / Max Power | Kw | 450/600 |
| Gears | 7 | |
| Climbing Angle | % | ≥35 |
| Max.Speed | Km/h | ≥42 |
| Front Suspension | Hydraulic Spring + Cylinder | |
| Rear Suspension | Balance shaft + Hydraulic Spring + Cylinder | |
| Battery Capacity | Kwh | 350 / 422 / 564 / Optional |
Zero emission, non-pollution, low energy consumption, green, environment-friendly.
* Economical and energy-efficient
Reducing energy consumption by 20% per kilometer L/T with the help of intelligent control for vehicle power output and feedback.
Safe driving by achieving multiple interlocks with a self-developed vehicle control strategy.
* Stable and reliable
Complete machine improved, up to overload capacity by 20%, and the MTBF is 50% longer than other competing products in the industry.
* Efficient and powerful
With the integrated station for charging and swapping, you only need 1 hour to charge and 5 minutes to swap the battery.
1. Charging mode: High power charging mode, 1 hour charge to 90%
2. Power change mode: Efficient and economic power change mode is adopted, and the power change time is 5 minutes.
3. The ground clearance reaches 750-800mm to improve vehicle passability and maintainability
4. Under normal circumstances, the charging demand of the battery is 400A and the voltage meets 750V, so the power of the charging pile is selected as P=UV That is, the power is 300kW.
5. The motor controller and 4-in-1 controller are used for joint control. The motor controller independently controls the driving motor to realize precise control of walking, braking and force taking. The controller integrates a motor driver, a DC-DC for charging 24V batteries, a power steering driver, an air compressor driver, a high voltage DC power distribution port for defrosting, and a high voltage output port for the air conditioner compressor.
6. The longitudinal beam section adopts two layers of 450×120×12 groove beam structure, which has better bending and torsional resistance and can adapt to the harsh working conditions in mining areas. All bolts on the frame are made of 10.9 class tightening bolts, high reliability and long life, not easy to loose; Single girder structure, effectively reduce the vehicle center of gravity of 100mm, small torsion range.
Integral welded equalizing suspension system and container frame increase the service life of the complete vehicle by 15%.
* High safety
Full hydraulic steering system makes steering lighter and safer; Free of a subframe container structure, lowering the center of gravity by 100MM.
The front hydro-pneumatic suspension structure replaces the traditional leaf spring structure, which significantly improves the driving comfort and extends the service life of key components and parts.
* High load bearing capacity
With the newly upgraded heavy-load axle, the vehicle has a large bearing capacity and high comprehensive transportation efficiency.
Please don't hesitate to contact me if you have any inquiry about the machinery / equipment / vehicles / trucks / trailers , we will do our best to offer you good quality products with good price .
FAQ :
1: What kind terms of payment can be accepted?
A: For terms of payment, L/C, T/T could accepted
2: What certificates are available in Machinery?
A: For the certificate, we have CE, ISO, Gost, EPA(USA)CCC,
3: What about the lead time?
A: 30 days after receiving the deposit.
4: What about the warranty time?
A: 12 months after shipment or 2000 working hours, whichever occurs first.
5. What about the Minimum Order Quantity?
A: The MOQ is 1 pcs.
6. How long will it take for the electric charging ?
A: 2 hours
7. How long will it take for the electric charging ?
A: 2 hours
8. How long will it take for replacing the battery ?
A: 5~10 mins
