Audited Supplier
IM901D
Electromagnetic Relay
Household Appliances Relay, Energy Meter, Industrial Control, EV Charger
2
Ac
2
High Power Relay
Enclosed Relay
Electromagnetic Type
Miniature
Electric Parameter Relay
2 Phases 90A 12VDC Coil Latching Relay
90A, 250VAC
Agsno2
6~24VDC
Black
IVY
Cartons/Pallet
60*34.5*19mm
Zhejiang, China
8536411000
Product Description
| Parameter Category | Parameter | Value/Specification |
| General Parameters | Main Dimensions | 60 * 34.5 * 19 mm |
| Weight | 80g (excluding peripheral accessories) | |
| Operating Temperature | -40 to +85 °C | |
| Operating Humidity | 45% to 95% RH | |
| Contact Parameters | Contact Material | AgSnO2 |
| Contact Form | 2A or 2B (2 sets of Normally Open or Normally Closed) | |
| Contact Resistance | ≤ 0.8 mΩ (initial value, @DC 6~24V, 1A) | |
| Maximum Switching Current | 90A | |
| Maximum Switching Voltage | 250VAC | |
| Performance Parameters | Rated Coil Voltage | DC 6, 9, 12, 24V |
| Pulse Duration | 100ms ~ 200ms (recommended) | |
| Rated Coil Power | 2.5W (single coil), 5W (dual coil) | |
| Pick-up Time | ≤ 30ms | |
| Release Time | ≤ 30ms | |
| Electrical Life | 10,000 operations (purely resistive load, 90A 230VAC) | |
| Mechanical Life | 100,000 operations | |
| Insulation Resistance | 1000 MΩ (500VDC) | |
| Coil to Contacts | 4000VAC, 50/60Hz, 1 min | |
| Between Different Contact Groups | 4000VAC, 50/60Hz, 1 min | |
| Across Open Contacts of Same Group | 2000VAC, 50/60Hz, 1 min | |
| Short-Circuit Current Withstand | 4500A (50/60Hz), ~10ms (non-explosive) | |
| Shock Resistance (Functional) | 100 m/s² (10G) | |
| Shock Resistance (Destructive) | 1000 m/s² (100G) | |
| Vibration | 1.5mm (double amplitude), 10~55Hz |
Cautions of Latching Relay:
1.Suggestions of relay's input
(1)Polarity-Please check the polarity inside of our technical specification, if single coil then"+ -" or "- +"are fine,
1.Suggestions of relay's input
(1)Polarity-Please check the polarity inside of our technical specification, if single coil then"+ -" or "- +"are fine,
you can change it by one pulse.If double coil then it's necessary to confirm "-+-" or "+-+"before leaving the our factory.
(2)Driving-Please energize the relay at our recommend pulse width, rated voltage for reliable performance, if 1.5
times or 2 times of value or lower driving condition plz confirm with our engineer.
(3)Relays'contact status may be changed during transportation or installation due to impact of external force,
therefore please reset to the required status.
(3)Relays'contact status may be changed during transportation or installation due to impact of external force,
therefore please reset to the required status.
2.Suggestions of relay's output
(1)When choosing the relay with hard connection,please avoid the external force on load terminals during or after
(1)When choosing the relay with hard connection,please avoid the external force on load terminals during or after
the installation.
(2)When the relay will be connected with screw or bolts to the relays' terminals, plz make sure your connection is
fastened and prevent relay from damages or other safety problems due to temp. Rise..
(3)The sampling signal wires of products are limited, please do not pull or torque during installation.
