Audited Supplier
Ifk Series Chemical Plastic Lining Centrifugal Pump for Oil Acid Industry
As a single-stage, single-suction cantilver type centrifugal pump, IFK plastic centrifugal pump uses plastic lining technology for its flow passage components, thus solve the insufficient strength problem of plastic components. Suction in axial direction and discharge in radial direction for pump casing. Pump casing casted with supporting legs which can be directly fastened on pump seat. Pump cover is fixed on suspension body by spigot and pump cover is held firmly by pump casing and suspension body. Technical requirement of the pump conforms to ISO5199 standard.
Parameters of IFK Series Plastic lining Centrifugal Pump
| Flow Rate: | Q=3~600(m³/h) |
| Total Head: | H=5~80(m) |
| Operating Temperatrue: | T= -20~175(ºC) |
Usage of IFK Series Plastic lining Centrifugal Pump
These pumps are designed to convey various kinds of clear liquid such as acid, alkali, salt and oil etc or slurry. They can replace 316L, monel alloy, hastelloy, titanium and high alloy stainless steel and ultra-low carbon stainless steel etc in the medium lower than 175. Their design conforms to ISO 5199 standard.
Structure of IFK Series Plastic lining Centrifugal Pump
For shaft seal of pump,there are different patent products seal for your selection as Follows:
The order related tests, confirm the performance of pump conform.
The company carries out the tests below as standard:
Hydrostatic pressure test:
Hydrostatic pressure test based on clean water at ambient temperature,test pressure is 1.5 times on design pressure.
Performance test:
Measurement according to ISO9906,accuracy class∥,acceptance class2B.
NPSH test:
According to ISO5199 standard.
Vibration test:
According to ISO5199,vibration lightness level is controlled at class A.
Temperature test:
Test the temperature rise of bearing,and keep records.
Raw material inspect:
Spare and casting parts inspection,to ensure the reliability of the whole machinery.
