Audited Supplier
Ceramic Band Heaters
ISO9001, CE
Band Heater
Fe-Cr-Al Wire
Band
Round
Ceramic
Max 3.5W/Cm2
Extruder, Injection Molding Machine and So on
500c
Stainless Steel 304
12 Months
Yes
Lead Wire/Terminal Thread/Terminal Box
1W-10000W
no
Carton Box, Wooden Case
Resistance Wire Cr-Ni
China
85168000
Product Description
Industrial Ceramic Band Heaters For Extruder
1. Ceramic Band Heater Introduction
Ceramic Band heaters are are used in plastic processing industry for keeping the nozzles of injection molding machines hot.
Nozzle heaters are manufactured from high quality mica sheet or ceramic, and have Nickel Chrome resistance. Nozzle heaters are covered by metal sheathing & can be rolled to the required shape.
Band heaters operate efficiently when the sheath temperatures are kept below 280 degree centigrade. If this temperature is maintained, the life of the band heaters gets long.
2. Main Features1. Long Operational Life
3. Parameter
Nozzle heaters are manufactured from high quality mica sheet or ceramic, and have Nickel Chrome resistance. Nozzle heaters are covered by metal sheathing & can be rolled to the required shape.
Band heaters operate efficiently when the sheath temperatures are kept below 280 degree centigrade. If this temperature is maintained, the life of the band heaters gets long.
2. Main Features
1. Long Operational Life
2. Energy saving
3. Fast heat conduction
4. Uniform heat distribution
5. High electrical insulation
6. Easy installation
7. Great mechanical resistance to shocks and to tearing applied to the cables
8. Tight manufacturing tolerances
9. Various sizes, no limited max sizes
3. Parameter
| Industrial Heater | High Quality and High Power Density Ceramic Band Heater |
| Resistance Wire | NiCr 80/20 |
| Sheath | 304 stainless steel |
| Insulation | ceramic |
| Terminal | ceramic terminal/flange/lead/terminal box and customized |
| Heater Voltage | 120V 220V 230V 240V 480V standard (other voltages available on request) |
| Wavelength range | 2-10 microns |
| Operating Temperature | 300°C to 700°C (572°F - 1292°F) |
| Operating Life-Up | 20,000 hrs |
| Radiation distance | 100 mm to 250 mm |
4. Construction
5. Ceramic Band Heater Making Process
6. Typical Application:
1.Plastic injection moulding machine
2.Hollow shaping machine/Blow-molding machine
3.Extrusion machine/Co-extrusion line
4.Raw material processing equipment
5.Pelletizing equipment
6.Granular machine
7.All types of plastics processing machines
2.Hollow shaping machine/Blow-molding machine
3.Extrusion machine/Co-extrusion line
4.Raw material processing equipment
5.Pelletizing equipment
6.Granular machine
7.All types of plastics processing machines
