Audited Supplier
Inconel 617
Aviation, Electronics, Industrial, Medical, Chemical
JIS, GB, DIN, BS, ASTM, AISI
Alloy
Nickel Pipe
Not Powder
Mingson
Wooden Crate
As customers's request
China
7505120000
Product Description
Alloy 617 has excellent resistance to oxidation and carburization at high temperatures. It also resists a wide range of
corrosive aqueous environments. Alloy 617 has high strength and maintains much of its strength at elevated temperatures.
CHEMICAL COMPOSITION
THE MINIMUM MECHANICAL PROPERTIES AT NORMAL TEMPERATURE
CHEMICAL COMPOSITION
| C | Mn | Fe | P | S | Si | Cu | Ni | Co | Al | Ti | Cr | Nb+Ta | Mo | B | N | W | La | V | Nb | |
| Inconel 600 | ≤0.15 | ≤1.0 | 6.0-10.0 | ≤0.015 | ≤0.015 | ≤0.5 | ≤0.5 | ≥72.0 | -- | -- | -- | 14.0-17.0 | -- | -- | -- | |||||
| Inconel 601 | ≤0.1 | ≤1.5 | balance | ≤0.02 | ≤0.015 | ≤0.5 | ≤1.0 | 58.0-63.0 | -- | 1.0-1.7 | -- | 21.0-25.0 | -- | -- | -- | |||||
| Inconel 625 | ≤0.1 | ≤0.5 | ≤5.0 | ≤0.015 | ≤0.015 | ≤0.5 | -- | ≥58.0 | ≤1.0 | ≤0.4 | ≤0.4 | 20.0-23.0 | 3.15-4.15 | 8.0-10.0 | -- | |||||
| Inconel 617 | 0.05-0.15 | ≤1.0 | -- | ≤0.012 | ≤0.015 | ≤1.0 | ≤0.5 | ≥44.5 | 10.0-13.0 | 0.8-1.5 | ≤0.6 | 20.0-24.0 | -- | 8.0-10.0 | ||||||
| Inconel 690 | ≤0.05 | ≤0.5 | 7.0-11.0 | -- | ≤0.015 | ≤0.5 | ≤0.5 | ≥58.0 | -- | -- | -- | 27.0-31.0 | -- | -- | -- | |||||
| Inconel 718 | ≤0.08 | ≤0.35 | balance | ≤0.015 | ≤0.015 | ≤0.35 | ≤0.3 | 50.0-55.0 | ≤1.0 | 0.2-0.8 | 0.65-1.15 | 17.0-21.0 | 2.8-3.3 | ≤0.06 | 4.75-5.5 | |||||
| Inconel 725 | ≤0.03 | ≤0.35 | ≤0.015 | ≤0.010 | ≤0.20 | 55.0-59.0 | 19.0-22.5 | 7.0-9.5 | ||||||||||||
| Inconel 750 | ≤0.08 | ≤1.0 | 5.0-9.0 | -- | ≤0.01 | ≤0.5 | ≤0.5 | ≥70.0 | ≤1.0 | 0.4-1.0 | 2.25-2.75 | 14.0-17.0 | 0.7-1.2 | -- | -- | |||||
| Inconel 20 | ≤0.07 | ≤2.0 | balance | ≤0.045 | ≤0.035 | ≤1.0 | 3.0-4.0 | 32.0-38.0 | -- | -- | -- | 19.0-21.0 | 8*C-1 | 2.0-3.0 | -- | |||||
| Inconel 28 | ≤0.02 | ≤2.5 | balance | ≤0.02 | ≤0.015 | ≤1.0 | 0.6-1.4 | 30.0-34.0 | 26.0-28.0 | 3.0-4.0 | ||||||||||
| Inconel 925 | ≤0.03 | ≤1.0 | balance | ≤0.03 | ≤0.03 | ≤0.5 | 1.5-3.0 | 42.0-46.0 | -- | 0.15-0.5 | 1.9-2.4 | 19.5-23.5 | -- | 2.5-3.5 | -- | |||||
| Inconel 926 | ≤0.02 | ≤2.0 | balance | ≤0.03 | ≤0.01 | ≤0.5 | 0.5-1.5 | 24.0-26.0 | -- | -- | -- | 19.0-21.0 | -- | 6.0-7.0 | -- | 0.15-0.25 | ||||
| Inconel 825 | ≤0.05 | ≤1.0 | balance | ≤0.02 | ≤0.03 | ≤0.5 | 1.5-3.0 | 38.0-46.0 | -- | ≤0.2 | 0.6-1.2 | 19.5-23.5 | -- | 2.5-3.5 | -- | |||||
| Inconel 800 | ≤0.1 | ≤1.5 | balance | -- | ≤0.015 | ≤1.0 | ≤0.75 | 30.0-35.0 | -- | 0.15-0.6 | 0.15-0.6 | 19.0-23.0 | -- | -- | -- | |||||
| Inconel 800H | 0.05-0.1 | ≤1.5 | balance | ≤0.015 | ≤1.0 | ≤0.75 | 30.0-35.0 | -- | 0.15-0.6 | 0.15-0.6 | 19.0-23.0 | -- | -- | -- | ||||||
| Inconel 800HT | 0.06-0.1 | ≤1.5 | balance | ≤0.015 | ≤1.0 | ≤0.75 | 30.0-35.0 | 0.15-0.6 | 0.15-0.6 | 19.0-23.0 |
THE MINIMUM MECHANICAL PROPERTIES AT NORMAL TEMPERATURE
| Alloy and State | Tensile Strength | Yield Strength | Rate of Elongation | Brinell Hardness |
| Rm N/mm2 | RP0.2N/mm2 | A5% | HB | |
| Inconel 600(Outside Diameter≥127) | ≥550 | ≥205 | ≥35 | - |
| Inconle 600(Outside Diameter≤127) | ≥550 | ≥240 | ≥30 | - |
| Inconel 601 | ≥550 | ≥205 | ≥30 | - |
| Inconel 625 Solid Solution | ≥690 | ≥276 | ≥30 | ≤220 |
| Inconel 625 Annealing | ≥827 | ≥414 | ≥30 | - |
| Inconel 690 | 700 | 350 | 35 | ≥85 |
| Inconel 718 (Solution Treatment) | <965 | 550 | 30 | ≤363 |
| Inconel 718 (Solution + Aging) | ≥1275 | ≥1034 | ≥12 | ≥331 |
| Inconel 750 | 1170 | 790 | 10 | 302-363 |
| Inconel 20 | 551 | 241 | 30 | - |
| Inconel 28 | ≥500 | ≥215 | 40 | ≤155 |
| Inconel 617 | 680 | 300 | 30 | - |
| Inconel 925 | 650 | 300 | 30 | - |
| Inconel 926 | 650 | 295 | ≤35 | - |
| Inconel 825 | 586 | 241 | 30 | - |
| Inconel 800 | 520 | 205 | 30 | - |
| Inconel 800H | 450 | 170 | 30 | - |
| Inconel 800HT | 450 | 170 | 30 | - |
