Audited Supplier
800
Yes
1 Year
<15 Years
CCC, CE, ISO
380V
Vertical
2 PCS
Optional
EPS/XPS/Epo/EPE etc
Yes
Myaid
Plywood Box
320/350
China
8419899090
Product Description
The EPS styrofoam hot melt machine can crush and hot melt EPS/XPS/EPE/EPO etc foam materials.It works without heater at chamber end.It is different with traditional melt machine.
Machine works with two crushing shafts in hopper.
Conveyor for feeding materials is optional.
Temperature control and frequency control is installed at control box.
Hard teech reducer and copper motor are on the hot melt machine.
Benefits of 'Friction Produces Heat'
1) Almost needs no pre heating time,you can feed materials immediately after you turn on machine.Traditional lumps machine with heaters need about 20 minutes to heat chamber.
2) Almost no smoke to be produced.
3) Almost no smell to be produced.
4) Options to be with heater if the foam materials are wet.Cause heater can increase temperature to be higher inside chamber.
Machine works with two crushing shafts in hopper.
Conveyor for feeding materials is optional.
Temperature control and frequency control is installed at control box.
Hard teech reducer and copper motor are on the hot melt machine.
| Hopper Size | Capacity | Chamber Dia. | Shredding Shafts Qty | Motor Power | Machine Size |
| 800*800mm | 200kg/h | 245mm | 2 pcs | 18.5kg | 1600*1500*800 |
