Audited Supplier
115/230DR10AL-02
Adjust
Closed-Loop
Continuous
Automatic Control, Protection
ISO: 9001, CE
New
Customized
PCB
0-90V 0-110V 0-160V 0-180V 0-220V
10A
Speed Mode
0-5V Potentiometer
0.45kg
1 Year
keya
Carton
116*103*48 mm
China
9032899090
Product Description
Factory Price 90/180V DC Motor Driver
MMT-115/230DR Series DC motor driver is a kind of speed governing product developed and produced by adopting past successful experience and combining modern advanced technology. This series of products have met international standard requirements and are sold to many countries. This driver adopts thyristor chopping control principle and uses independent trigger mode. Even there is no velocity feedback, high speed ratio can be achieved to make it more accurate and reliable.
Excellent performance, reliable quality and high cost performance make it a strong performer in DC motor driver field and it was widely used in plastic machinery, food machinery, cable equipment, machining, paper printing, testing equipment, laboratory equipment and mixing equipment, etc.
2. Product characteristics
SMT technology, small sizeGood following features, rapid respond speed
Wide speed ratio, strong mechanical features
Applicable to permanent magnet ,separate excitation type and DC torque motor
Double closed-loop PI regulation (Voltage, current)
Current setting and current-limiting protection (continuous operation setting current)
Large low speed output moment
Over-current protection function
Quick stop function
Arbitrary setting of upper and lower speed
Soft start, soft stop setting function
Selection of speed mode, torque mode
Normally open, close selection of enable signal
Selection of input, output voltage switch
Driver speed governing controlled by standard signal input 0-5V or 10K potentiometer
3.Technical parameters
input voltage AC: 115V/230V±10% (other voltages can be customized as customer's requirements)frequency: 50/60HZ±5%
output voltage DC: 0~90V 0-110V 0-160V 0-180V 0-220V (can be set)
rated output current: 10A
revolving speed ratio: 80:1
output voltage accuracy: ≤0.1%
soft starting time: 0.2S-20S
soft stopping time: 0.2S-10Senvironment temperature: -10ºC~+60ºC
environment humidity: relative humidity ≤65% (no moisture condensation)
insulation voltage resistance: 1500V AC
insulation resistance: >500MΩ
leak current: ≤0.09mA
4. Product performance
1.Strong mechanical features, static rate is 1%.2.Wide speed governing range (0-MAX SPD setting value)
3.Rapid dynamic response process
4.Automatic smooth transition process during speed up and cut.
5.Good excavation features which automatically limit over-current within the range of set value.
6.High reliability, compact structure, extremely high cost performance
- Standard export carton with sponge
- Size : base on the order
- Weight : base on the order
- Detail data will be confirmed before shipping
| Pre-service | After Sales Service |
| Inquiry and Consult Support Sample testing Support View our Factory | Help instal and use the product 24 hours online problem solving |
