



Basic Parameters | ||
Sensor | PYTHON 300 | |
Sensor type | CMOS | |
Shutter type | Global | |
Resolution | 640 x 480 | |
Frame rate | 815fps | |
Bit depth | 10 | |
B&W/Color | Mono | |
Image size | 4.8 x 4.8 | |
Image parameters | ||
Pixels | 0.3MP | |
Signal-to-noise ratio | >38dB | |
Wide dynamic range | >60dB | |
Image format | Mono8/10/10Packed | |
Binning | Support | |
Decimation | Support | |
ROI | Support | |
X Flip | Support | |
Y Flip | Support | |
Gain | 1~32 | |
Gamma | Range 0~4, support LUT | |
Shutter exposure | 1μS~1S | |
Image acquisition mode | Software triggered / hardware triggered / free running | |
SPC | Support | |
FPN | Support | |
Performance Parameters | ||
Configuration channel | support 2 groups of user-defined configuration saving | |
Cache | 256MB | |
Interface Parameters | ||
Interfaces | USB3.0 | |
GPIO interface | 1 way optocoupler isolated input, 1 way optocoupler isolated output, 1 way configurable input and output without optocoupler isolation | |
Lens interface | C-mount | |
Power supply parameters | ||
Power supply mode | USB interface power supply / DC power supply through Hirose interface, voltage range 9V~24V | |
Power consumption | 12V≈3.4W | |
Structure parameters | ||
Product size | 29mm*29mm*29mm | |
Product weight | 60g | |
Environmental parameters | ||
Temperature | storage temperature: - 30~+80; working temperature: - 30~+50 |





