Audited Supplier
110mm
If Has Quality Defects, a New One Will Be Made.
180 Days
DIN, JIS
Cutting, Heat Treatment, Pta Welding, Casting
Long Working Life
Alloy Steel
OULIN
Plywood Case
110mm
China
84779000
Product Description
Detail Information For JM1200-110mm Bimetallic Screw Barrel for CHEN HSONG Injection Molding Machine:
Application: for CHEN HSONG injection molding machine.
Customer's Requirement: good abrasive resistance, long working life.
Screw's quality: bimetallic screw, screw's alloy contains 15%-30% tungsten carbide powder.
Barrel's quality: OLIN-AR02 bimetallic barrel for 30%-40% glassfiber, better abrasive resistance, medium corrosive resistance.
Detail Information For All Brand Injection Molding Screw and Barrel:
Brief introduction:
it can be used in vertical& horizontal type injection molding machine, has different quality for different working sotuation, we can design it according to different material or customers'requirements.
Specification:
Diameter: Ø20mm-Ø300mm
Clamping force: 100KN-35000KN
Shot weight: 30g-30000g
Quality:
there are many different quality can be chosen, from normal nitriding quality to best abrasive& corrosive resistance, welcome to contact us.
Heat treatment:
Advance hardening and tempering
Nitriding treatment
Mid/high-frequency quenching
Vacuum hardening
Technical Parameters:
Nitriding depth: 0.50mm-0.80mm
Nitriding hardness: HRC56-58
Surface roughness: Ra 0.4
Screw straightness: 0.015mm
Alloy layer depth: 3mm
Hardness for alloy layer/ fully hardened screw: HRC56-64
OULIN SCREW: YOUR LOYAL PARTNER FOR SCREW AND BARREL~
COMPANY OVERVIEW:
Application: for CHEN HSONG injection molding machine.
Customer's Requirement: good abrasive resistance, long working life.
Screw's quality: bimetallic screw, screw's alloy contains 15%-30% tungsten carbide powder.
Barrel's quality: OLIN-AR02 bimetallic barrel for 30%-40% glassfiber, better abrasive resistance, medium corrosive resistance.
Detail Information For All Brand Injection Molding Screw and Barrel:
Brief introduction:
it can be used in vertical& horizontal type injection molding machine, has different quality for different working sotuation, we can design it according to different material or customers'requirements.
Specification:
Diameter: Ø20mm-Ø300mm
Clamping force: 100KN-35000KN
Shot weight: 30g-30000g
Quality:
there are many different quality can be chosen, from normal nitriding quality to best abrasive& corrosive resistance, welcome to contact us.
Heat treatment:
Advance hardening and tempering
Nitriding treatment
Mid/high-frequency quenching
Vacuum hardening
Technical Parameters:
Nitriding depth: 0.50mm-0.80mm
Nitriding hardness: HRC56-58
Surface roughness: Ra 0.4
Screw straightness: 0.015mm
Alloy layer depth: 3mm
Hardness for alloy layer/ fully hardened screw: HRC56-64
OULIN SCREW: YOUR LOYAL PARTNER FOR SCREW AND BARREL~
COMPANY OVERVIEW:
