Audited Supplier
pctfe
PCTFE
High-Performance Plastic
35MPa
2.10-2.18g/cm3
20-75%
-200-150 Degree
15kv/mm
hdgfz
Export Carton, Pallet
full specification
China
3902900090
Product Description
Product name
Kel-f PCTFE Rod or PCTFE Bar for cryogenic application
Main properties
. excellent low temperature resistant
. Good mechanical property
. Low coefficient of liner expansion
.Good dimensional stability
. Good penetration function
Product application
PCTFE is widely used for seals in the condition of low temperature with high pressure(gas, liquid nitrogen, liquid oxygen ect) ,semiconductor, chemical, pharmaceutical,aerospace and other relevant sealing area.
Technical specifications
Products available:
Other products available
Company introduction:
Hongda was founded in 1999 and it is a professional manufaturer of high-performance plastics in the form of semi-finished products and finished parts.The products sell well throughout the country and exported to more than 20 countries&areas, which are widely used in chemical industry,semiconductor, gas&oil, pump&valve, water treatment...
Factory Key equipment:
Kel-f PCTFE Rod or PCTFE Bar for cryogenic application
Main properties
. excellent low temperature resistant
. Good mechanical property
. Low coefficient of liner expansion
.Good dimensional stability
. Good penetration function
Product application
PCTFE is widely used for seals in the condition of low temperature with high pressure(gas, liquid nitrogen, liquid oxygen ect) ,semiconductor, chemical, pharmaceutical,aerospace and other relevant sealing area.
Technical specifications
| Property | Norm | Value |
| Density | ISO1183 | 2.1-2.18 |
| Tensile strength at break ( Mpa) | ISO527 | 38-48 |
| Modulus of elasticity | ISO527 | 1.45-1.6 |
| Elongation at break | ISO527 | 40-100 |
| Shore D | DUROMETER | 85 |
| Temperature range | / | -200-120 |
| Coefficient of linear thermal expansion | ISO11359 | 0.6 |
Products available:
| Diameter (unit: mm) | length 1 (unit: mm) | length 2 (unit: mm) |
| 3.0 | / | 1000 |
| 4.0 | / | 1000 |
| 5.0 | / | 1000 |
| 6.0 | 200 | 1000 |
| 7.0 | 200 | 1000 |
| 8.0 | 200 | 1000 |
| 10.0 | 200 | 1000 |
| 12.0 | 200 | 1000 |
| 13.0 | 200 | 1000 |
| 15.0 | 200 | 1000 |
| 16.0 | 200 | 1000 |
| 18.0 | 200 | 1000 |
| 20.0 | 200 | 1000 |
| 22.0 | 200 | 1000 |
| 25.0 | 200 | 1000 |
| 30.0 | 100~500 | 1000 |
| 35.0 | 100~500 | 1000 |
| 40.0 | 100~500 | 1000 |
| 45.0 | 100~500 | 1000 |
| 50.0 | 100~500 | 1000 |
| … |
Other products available
Company introduction:
Hongda was founded in 1999 and it is a professional manufaturer of high-performance plastics in the form of semi-finished products and finished parts.The products sell well throughout the country and exported to more than 20 countries&areas, which are widely used in chemical industry,semiconductor, gas&oil, pump&valve, water treatment...
Factory Key equipment:
