Audited Supplier
  LM-CS2000
Monitoring System
Sentinel Surveillance, Sound Monitoring
Waterproof / Weatherproof
Camera Lens
Optical Fiber Transmission
Monitoring
Vehicle Monitoring Software, Computer Monitoring Software, Mobile Phone Monitoring Software
Client Software
Smaller Models
CCD
Autofocus Lens
Pan / Tilt / Zoom
480tvl
LM
Wooden Box
stainless steel material
China
9031809090
Product Description
Kiln tail flue gas chamber infrared temperature measurement system
Product model: LM-CS2000
Product introduction:
1.Suitable for all kinds of kiln tail smoke room and kiln tail decomposing furnace. It can constantly monitor the temperature accurately.
Don't contact with measured object, without abrasion, free maintenance.
2. Measure temperature with high accuracy and fast speed.
3. Special wavelength, prevent the interference of the smoke.
4. Laconic structure, easy to mounting.
5.Use special high temperature resistant material,with high strength and corrosion resistant.
6. Laser collimation,accurate positioning.
7. Regular clean crust automatically, keep the temperature accuracy.
8. Use high- temperature rodless cylinder,with good reliability.
9. In the central control room, can control the equipment to entry and exit.
10. Without maintenance, save a lot of production time and manpower.
11. Three years warranty and has the advantages of being cheap.
Technical parameters:
1. Temperature resolution:1ºC
2. Distance coefficient:150:1
3. Temperature Range:0ºC~1300ºC
4. Response time:100ms
5. Spectral response:5.14μm
6. Precision:1.0% measured value(ºC)
7. Repeatability:0.5%measured value(ºC)
8. Emissivity:0.1~1.00
9. Power supply:24VDC±25%
10. Export:4MA~20MA/500Ω
11. Output insulation:500V
12. Environment temperature:-20ºC~+75ºC
13. Environment humidity:≤90%
Compressed air:
1. Air pipe port :G1/4"
2. Work pressure:0.2MPa~0.8MPa
3. Maximum moment:15(nm)
4. Maximum load:300(n)
5. Minimum flow:0.3M³/min
Working condition temperature:
1. Environment temperature:-20ºC~75ºC
2. Environment humidity:≤90%
3. Smoke room temperature:≤1400ºC
Dimension:
1. Automatically exit device:Φ115(diameter)*1560(length)(unit:mm)
2. Control box:500*700*200mm (W*H*D)
3. 4MA-20MA output connect with DSC
4. Installation diagram(see figure)
5. Open pore requirement(see figure)
Product model: LM-CS2000
Product introduction:
1.Suitable for all kinds of kiln tail smoke room and kiln tail decomposing furnace. It can constantly monitor the temperature accurately.
Don't contact with measured object, without abrasion, free maintenance.
2. Measure temperature with high accuracy and fast speed.
3. Special wavelength, prevent the interference of the smoke.
4. Laconic structure, easy to mounting.
5.Use special high temperature resistant material,with high strength and corrosion resistant.
6. Laser collimation,accurate positioning.
7. Regular clean crust automatically, keep the temperature accuracy.
8. Use high- temperature rodless cylinder,with good reliability.
9. In the central control room, can control the equipment to entry and exit.
10. Without maintenance, save a lot of production time and manpower.
11. Three years warranty and has the advantages of being cheap.
Technical parameters:
1. Temperature resolution:1ºC
2. Distance coefficient:150:1
3. Temperature Range:0ºC~1300ºC
4. Response time:100ms
5. Spectral response:5.14μm
6. Precision:1.0% measured value(ºC)
7. Repeatability:0.5%measured value(ºC)
8. Emissivity:0.1~1.00
9. Power supply:24VDC±25%
10. Export:4MA~20MA/500Ω
11. Output insulation:500V
12. Environment temperature:-20ºC~+75ºC
13. Environment humidity:≤90%
Compressed air:
1. Air pipe port :G1/4"
2. Work pressure:0.2MPa~0.8MPa
3. Maximum moment:15(nm)
4. Maximum load:300(n)
5. Minimum flow:0.3M³/min
Working condition temperature:
1. Environment temperature:-20ºC~75ºC
2. Environment humidity:≤90%
3. Smoke room temperature:≤1400ºC
Dimension:
1. Automatically exit device:Φ115(diameter)*1560(length)(unit:mm)
2. Control box:500*700*200mm (W*H*D)
3. 4MA-20MA output connect with DSC
4. Installation diagram(see figure)
5. Open pore requirement(see figure)
Package: Standard export package(Carton box or Wood box)
MOQ: 1PCS
Loading Port: Shanghai,China
Delivery Time: 15~25 working days
Q1: About the warranty?
A1: We can offer 1 year warranty.
Q2: About the quotation?
A2: Yes, please confirm product model and order quantity,the quotation send to you by email.
Q3: About Terms of payment?
A3: L/C,T/T,D/A,D/P,Money Gram,Western Union,Paypal.
Q4: About the features?
A4: Explosion-Proof/High Temperature Resistance/Water-proof
