Audited Supplier
GS27806-1
Incandescent
Natural Slate
Modern
Portable
E27
Electric
on/off
N/a
100W
UL
Without Light Source
Factory
Hand Carved Slate with Hammered Copper Details
Brown
Pyramid
Fabric
22.0 Lbs
Dry Location
Mail Order Package
W18"*D13"*H29"
China
9405290090
Product Description
Carolyn Kinder Slate Accent Lamp
This indoor/outdoor lamp features a 3-dimensional stacked stone design formed out of molded concrete, paired with rustic black metal details. The rectangle bell shade is a beige linen, weather resistant fabric.
Features:
- Product Height: 29 inches
- Product Width: 13 inches
- Product depth: 18 inches
- 1 light fixture, which uses 1 medium base bulb(s)
- Designed by: Factory
- Lamp features a shade with height: 12 and a width and depth of: 13W x 18D
Important safety instructions:
- Use only three-wire outdoor extension cords that have three-prong grounding plugs and grounding receptacles that accept the appliance's plug.
- Ground fault circuit interrupter(gfci) protection is to be provided on the circuit or outlet to be used for the wet location portable luminaire, receptacles are available having built-in gfci protection and are able to be used for this measure for this measure or safety.
- Use only with an extension cord for outdoor use, such as an extension cord of cord type sw,sw-a,sow,sow-a, stw, stw-a, stow, stow-a, sjw, sjw-a, sjow, sjow-a, sjtw, sjtw-a or sjtow, sjtow-a.
Bulb Replacement
- Before replacing the bulb, be sure that the glass dome and bulb are cool and lamp is unplugged
- Unscrew glass dome and existing bulb from socket, replace with a new bulb, then recover the glass dome, plug power supply cord back into outlet.
Care and Cleaning
- Clean the lamp with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
- Wash the shade with a soft brush and mild detergent ( such as dish-washing soap) and then thoroughly rinsed.
| Problem | Possible Cause | Solution |
| The bulb will no light | - This bulb is burned out | - Replace the light bulb |
| - The power is off | - Ensure that the power supply is turned on | |
| - Did not insert plug into power outlet | - Ensure that the plug is fully and properly inserted into the power outlet | |
| - The circuit breaker is off | -Ensure that the circuit breaker is et in the on position | |
| The fuse blows or a circuit breaker trips when the light is turned on | - There is an exposed wire | - Discontinue use of the lamp. |
| - There are too many items on one circuit | - Contact a qualified electrician or call the related Customer Service Team | |
| - Uplug other items on the circuit |
