Audited Supplier
KSM1100
Planer type Milling Machine
Hardware
Ram
Angle Milling Cutter
Indexable Type
Artificial
Semiautomatic
High Precision
ISO 9001
New
Plywood Case
Product Description
Cylinder Head and Block Resurfacing Machine KSM1100
This manual is supplied with the machine and should be kept in a safe place for future reference.
It has been written for the operator who must read and fully understand its contents before operating the machine.
Carefully read the warnings and the instructions contained in the manual. They contain important
information regarding emergency situations and also for the maintenance of the machine.
The manufacturer declines any responsibility for breakdowns, damage or injury caused by non-
observance of the instructions contained within this manual.
1. Ideal resurfacing machine for cylinder head and block of car and truck.
This manual is supplied with the machine and should be kept in a safe place for future reference.
It has been written for the operator who must read and fully understand its contents before operating the machine.
Carefully read the warnings and the instructions contained in the manual. They contain important
information regarding emergency situations and also for the maintenance of the machine.
The manufacturer declines any responsibility for breakdowns, damage or injury caused by non-
observance of the instructions contained within this manual.
1. Ideal resurfacing machine for cylinder head and block of car and truck.
2. High quality cast iron frame offers high rigidity and sturdiness features.
3. Variable table travel feed / head rotate speed.
4. Table feed operated by ball screw drive extremely precise.
5. Taiwan brand inverters control table travel and head rotate.
6. Manual / continuous working cycle programs.
7. CE standard control panel.
8. Safety guard with policarbonate shield.
9. Pair of parallel supports with 6 clamps.
10. 1/2" CBN /PCD insert and tool holder as standard accessories.
4. Table feed operated by ball screw drive extremely precise.
5. Taiwan brand inverters control table travel and head rotate.
6. Manual / continuous working cycle programs.
7. CE standard control panel.
8. Safety guard with policarbonate shield.
9. Pair of parallel supports with 6 clamps.
10. 1/2" CBN /PCD insert and tool holder as standard accessories.
| Model | KSM 1100 |
| Table travel | 1365 mm |
| Max. Workpiece length | 1100 mm |
| Max. Workpiece width | 445 mm |
| Min - Max. Workpiece height | 260 - 520 mm |
| Milling wheel diameter | 400 mm |
| Variable head rotate speed | 300 - 1200 rpm |
| Variable Table travel speed | 0 - 600 mm/min |
| Head motor | 2.2 kw |
| Table motor | 1.5 kw |
| Dimension | 190 x 125 x 168 cm |
| N.W / G.W | 1500 / 1760 kg |
