Audited Supplier
L-6202
Tough 2-Functional UV Polyurethane
L-6202
UV Resin
UV Curable
Colorless or Light Yellow Transparent Liquid
15000-25000
1.1±0.1
100
≤3
87D
1.528
29.2
2
2
Low Viscosity, Fast Reaction Speed
Good Toughness of The Coating Film, Low Shrinkage
High Hardness, Hard But Not Brittle
UV 3D Printing; UV Glue; PVC Flooring;
UV Nail Polish; UV Screen Printing Ink, etc.
Very Suitable for 3D Printing
Lencolo
20kg/25kg/200kg
UV Polyurethane Resin
Guangdong, China
36069090
Product Description
Name:
L-6202 Tough 2-functional UV Polyurethane Resin Oligomer
Introduction:
Application:
Storage:
Tips:
L-6202 Tough 2-functional UV Polyurethane Resin Oligomer
Introduction:
L-6202 is a special modified polyurethane acrylic UV resin with low viscosity, extremely fast reaction
speed, high hardness, excellent toughness of the coating film, very low shrinkage and high tensile
strength., highly recommended for use in UV 3D printing, UV glue, PVC flooring, UV screen printing
and other fields.
Characteristic:
Performance:
Characteristic:
| Appearance | Colorless or light yellow transparent liquid | ||
| Viscosity (25ºC, CPS) | 15000-25000 | ||
| Density (25ºC,g/cm³) | 1.1±0.1 | ||
| UV component (%) | 100 | ||
| Acid value (mg KOH/g) | ≤3 | ||
| Shore hardness | 87D | ||
| Refractive index | 1.528 | ||
| Tensile strength (MPa)(ASTM D882) | 29.2 | ||
| Elongation at break (%)(ASTM D882) | 2 | ||
| Functional group | 2 | ||
Low viscosity, fast reaction speed;
Good toughness of the coating film, low shrinkage;
High hardness, hard but not brittle
Application:
UV 3D printing; UV glue; PVC flooring; UV nail polish, UV screen printing ink, etc.
Storage:
In order to prevent the product from polymerization and gelation reactions, please seal it and store it away
from heat sources and sunlight. It is recommended that the storage temperature is not higher than 30°C.
Unused products must be sealed and stored in a timely manner and cannot be stored in the open. The safe
storage period is 6 months at room temperature of 25°C and ventilation. 20KG/200KG/Barrel
Tips:
L-6202 is a two-functional UV polyurethane that is very suitable for UV 3D printing.
Note: Technical data represents typical values only. In view of the differences in formulas, production process, conditions, all the above statements must be adjusted according to the actual situation, our company does not make any promises. Our company reserves the right to reform its products without prior notice of any changes.
1) Are you a factory or trading company ?
A: We are a professional factory with over 5 years producing experience.
2) MOQ
A: 1KG
3) How about your payment?
A:30% deposit in advance, 70% balance by T/T, L/C, paypal, Western Union or else before shipment.
4) What about the lead time?
A: Samples around one week, mass production around two weeks. (The specific delivery time would be determined by the ordered products and quantity)
TDS and SAMPLE are avaiable for evaluation, Should you have any question, please feel free to contact us.
2) MOQ
A: 1KG
3) How about your payment?
A:30% deposit in advance, 70% balance by T/T, L/C, paypal, Western Union or else before shipment.
4) What about the lead time?
A: Samples around one week, mass production around two weeks. (The specific delivery time would be determined by the ordered products and quantity)
TDS and SAMPLE are avaiable for evaluation, Should you have any question, please feel free to contact us.
