Audited Supplier
Laser etching
Our company has advanced laser etching equipment, which can etch various shapes according to users' needs. It is accurate and rigorous, and is trusted by customers.
Please customize the user to provide the etching size or drawing
Laser etching gathers high-energy and low-power laser beams into a very small spot, forming a high power density at the conductive film, so that the conductive film layer is vaporized and evaporated in an instant, forming a chemical line, without losing the surrounding conductive film, and can be Precisely control the etching depth.
How to use and store conductive glass
1. Only four sides can be touched when picking and placing, not the surface of conductive glass ITO;
2.Handle with care and do not collide with other fixtures and machines;
3. If you want to store for a long time, you must pay attention to moisture, so as not to affect the resistance and transmittance of the glass; ITO conductive glass, the humidity is below 65% at room temperature Keep dry and cool, avoid direct sunlight.
Conductive glass cleaning
During the production, packaging and transportation of ITO/FTO conductive glass, the surface of the glass may be contaminated by impurities such as ash, dust, grease, etc. It is necessary to clean ITO and FTO conductive glass before using it. There are many cleaning methods, the most commonly used is ultrasonic cleaning with organic solvents. Grease stained on the glass surface is insoluble in water, but it is soluble in organic solvents such as toluene, acetone, and ethanol. Among them, toluene has the strongest decontamination ability, so first clean with toluene, but toluene cannot remain on the surface of the standard glass. Because toluene is soluble in acetone, it can be cleaned with acetone, which can not only clean off the residual grease, but also dissolve the toluene. Similarly, acetone cannot remain on the surface of the glass. As acetone is soluble in ethanol, it can continue to be cleaned with ethanol. Ethanol and water are mutually soluble in any ratio, and then a large amount of deionized water is used to dissolve the ethanol. Finally, it is stored in anhydrous alcohol, and then used when it is used, so that multiple tablets can be washed at one time. So generally:
Toluene (10-20min) → acetone (10-15min) → ethanol (10-20min) → deionized water (20-30min) in order to perform ultrasonic cleaning → anhydrous alcohol storage (take out when used for long-term storage)
This link is specially set up for customized customers
Due to different specifications and different prices, please contact us before shooting, we will do our best to meet your requirements!
We will not ship the goods if you have directly photographed the customized link for payment.
Therefore, we apologize for the inconvenience caused to you!
The glass is a customized product, and the size cannot be changed once the order is confirmed and the order is placed in the workshop.
We will not return or exchange the product if the size does not match due to the size measurement problem.
Q: What's the way of shipping and cost?
A:(1) We accept DHL, Fedex, TNT, UPS, EMS etc.
(2) If you have your own express account, it's great.If not,we could help you ship them.
Q: How to pay?
A: T/T, Paypal, etc
Q: What's your MOQ?
A: (1) For inventory, the MOQ is 5pcs.
(2) For customized products, the MOQ is 10pcs-25pcs.
Q: What's the delivery time?
A: (1) For the standard products
For inventory: the delivery is 5 workdays after you place the order.
For customized products: the delivery is 2 or 3 weeks after you place the order.
(2) For the special-shaped products, the delivery is 4 or 6 workweeks after you place the order.
Q: Do you have standard products?
A: Our standard products in stock.
Q: Can I customize the products based on my need?
A: Yes, we can customize the material, specifications and optical coating for your optical components based on your needs.
