Audited Supplier
Foam tank is widely used in foam fire extinguish system, such as chemical industrial enterprises, port and dock, large oil storage, airport oil storage, oil or fuel plants, boiler room. Dangerous goods storage, chemical warehouse, and so on.
It is made from tank, pressure-type proportioner, safety valves, control valves, level gauge and so on.
Both sides of its proportioner should be connected with pressed water and fire hose. There is a negative pressure formed in proportioner's room when the 0.4Mpa pressed water flows to proportioner's nozzle at a high speed, and foam concentrate will be sucked to proportioner because of the negative pressure, then the sucked foam concentrate mix with water and there form foam solution to a certain ratio. The spray gun will suck air and form air-foam solution when the pressed foam solution flows to spray gun. Finally the air-foam solution will be put out fires.
| Model No. | Rated Working Pressure (Mpa) | Working Pressure (Mpa) | Mixing Ratio | Range (M) | 25% Suction Time (S) | Spray Time (MIN) |
| PY4/8-100 | 0.7 | 0.4~1.0 | 3%-4% or 6%-7% | ≥15 | ≥120 | ≥25 |
| PY4/8-200 | ≥50 or ≥25 | |||||
| PY4/8-300 | ≥75 or 37.5 | |||||
| PY4/8-400 | ≥100 or ≥50 | |||||
| PY4/8-500 | ≥125 or ≥62.5 |
Successful Cases
Trade Capacity
International Commercial Terms(Incoterms):EXW,FOB, CIF, CFR
Terms of Payment: L/C, T/T
Average Lead Time:
Peak Season Lead Time: one month,
Off Season Lead Time: within 15 workdays
Number of Foreign Trading Staff: 4
Export Percentage: 30%
Main Markets: Southeast Asia
Production Capacity
Factory Address:Jubao Industrial Zone, Qingyuan, Guangdong, China
R&D Capacity:Own Brand, ODM, OEM
No. of R&D Staff: 15
No. of Production Lines:6
Annual Output Value:US$10 -20m
FAQ
Q:Are you a factory or trading company?
A:We are a professional manufacturer. We warmly welcome clients from worldwide to visit our factory and cooperate with us. We can offer OEM & ODM service.
Q:Can you produce goods with special specification?
A:Our company focuses on customized products. First of all, we need to know the specification in details, and then we need to check with our technology department. We will give customers satisfying reply as soon as possible.
Q:How long is the delivery time?
A:45-60 days after the advance payment.
Q:What's your advantage?
A: Independent R&D team, professional production and sales team, great production capacity sustainable supply. Use the best material and production process. Low defective rate.
Q:How can we guarantee quality?
A:Always a pre-production sample before mass production; Always final Inspection before shipment.
Q:Could you supply the samples?
A:Free samples always ready if the value is within our purview.
Q:Can you add some logo on the products?
A:Yes. We could OEM and design your logo.
Q:Are you able to design or explore a new products for us?
A:Yes, we are able to, if the clients could supply the drawings or samples.
Q:How about delivery ?
A:We can send to you by sea/air/express according to you, usually deliver within 7-10 working days after receive deposit.
