Audited Supplier
SDSF1000-l
Spare Parts
1 Year
Air-Cooled
Industrial Water
Closed System
Frequency Fan
Low
Food Processing
ISO, CE, CCC
New
200kg/H-4000kg/H
Stainless Steel
20-120min Adjustable
Ammonia or Freon
UFEC
Container
Customized
China
Product Description
Product introduction
Slide-driving spiral freezer is innovated and designed by our company, it is a new freezing equipment with three national patents. Comparing to the traditional single spiral IQF, slide-driving spiral freezer don't have cage and tensioning device, completely solve the problem of Derailment, extended belt lifetime, lower installed power, while achieving single spiral IQF low inlet and low outlet, and it can be made into a variety of rotating track geometry as needed. The device is widely used in aquatic products, meat category, fruits and vegetables, prepared foods category, and pre-cooling, freezing, baking process.
Conveyor belt
Using multi-gear-driven approach, belt fastener through the slider bar to the rail and run above polymer with a small friction coefficient polymer materials, with its own lubrication, not easy to produce dirt. On the one hand, omitting the middle cage, eliminating the static friction transmission components cause severe wear and tumble belt; on the other hand, the special structure of the net belt engaging with slider, so that never happen.
Model
SDSF500I,SDSF1000I,SDSF1000II,SDSF1500II,SDSF2000II,SDSF3000II
Compared with traditional spiral freezer
Serial number | Item category | Traditional spiral IQF | Slide -driving spiral IQF |
1 | Driving device | Driven by the static friction between the rotor and the net belt, which is easy to slip, has large wear, short lifetime, difficult maintenance, and is easy to be turned over. | Sliding on the rail thorough gear multi-layer rotary, the slider block with the rail, not slipping, do not turn the belt, easy disassembly, easy maintenance |
2 | Floor space | The double spiral can design the low inlet and low outlet, but the floor area is large. | Because the evaporator and the air cooler are installed inside the ellipsoid, same |
3 | Arrangement type | Single spiral IQF can only low inlet and high outlet, still need to configure the conveyor belt | Single spiral IQF can achieve low inlet and inlet outlet ,the direction can be flexible to layout |
4 | Running track | Driving principle is limited , can only achieve circular spiral trajectory | Can achieve circular, elliptical and other geometric trajectory |
5 | Tension | Yes | No |
6 | Installed power | The net belt is driven by a rotary cage, and the traction motor has a large friction coefficient, and the traction motor is provided with a tension traction motor. Installed power is large | Self lubrication friction components, the friction coefficient is less than the former, without tension traction motor, the installed power of the machine is small, and the energy consumption is small. |
Model | Library body size(mm)LxWxH | Number of layers | Effective width of mesh belt mm | Incoming and discharging temperatureºC |
SDSF1000II | 12500*5300*3100 | 2*10 | 550 | +50~-18 |
SDSF1500II | 13100*5600*3600 | 2*12 | 600 | |
SDSF2000II | 13100*5600*3900 | 2*16 | 600 | |
SDSF3000II | 13700*6000*4500 | 2*20 | 650 |
Freezing temperatureºC | Currency height mm | Operating conditions ºC | Required cooling capacity KW | Installed power kw |
-35 | 100 | +35/-42~-45 | 170 | 30.4 |
240 | 48 | |||
320 | 49.8 | |||
430 | 53.8 |
