Audited Supplier
Black Swan
One Year
Hair Removal Device
Two Handles
15.6 Inch Screen
ABS Appearance
10 Bars
1~10(Hz)
Removing Hair and Eyebrow Tattoo
Fosyderm
One Set
60 KG
China
Product Description
Laser Hair Removal Machine Black Swan
Laser Tattoo Removing Double Handles
Laser Tattoo Removing Double Handles
Product Name | Laser Hair Removal Machine Black Swan Laser Tattoo Removing Double Handles |
Handle | Double Handles |
Function | Removing Hair And Eyebrow Tattoo |
Screen | 15.6 Inch Screen |
Laser Bars | 10 Bars |
Appearance | ABS Appearance |
Principle:
Semiconductor freezing point hair removal is based on the principle of selective photothermal action.
Hair follicles and hair shafts are rich in melanin. Laser can accurately and selectively treat hair
removal with melanin as the target. After absorbing the energy of laser, the temperature of melanin
rises sharply, thus destroying the surrounding hair follicle tissue and removing hair.
Semiconductor freezing point hair removal is based on the principle of selective photothermal action.
Hair follicles and hair shafts are rich in melanin. Laser can accurately and selectively treat hair
removal with melanin as the target. After absorbing the energy of laser, the temperature of melanin
rises sharply, thus destroying the surrounding hair follicle tissue and removing hair.
Hair Removal:
When the therapeutic probe is applied to the skin surface.
Light can pass through the skin until it reaches the hair the position of melanin concentration in the hair rod.
Turns light energy into heat, heat is transmitted through the hair shaft to the isthmus of the hair follicle and the hair follicle bulge. Then high temperature acts on the hair, destroys (hairy papillae, hair growth points), and thus breaks the blood vessels in the bad hairy papilla atrophy it with heat, thus achieving hair removal effect.
Hair cycle - growth, decline and rest, hair follicles in the growth phase of hair removal effect, but only 10% to 20% of the hair during the growing period, it is necessary to follow a course of treatment to completely remove the hair.
When the therapeutic probe is applied to the skin surface.
Light can pass through the skin until it reaches the hair the position of melanin concentration in the hair rod.
Turns light energy into heat, heat is transmitted through the hair shaft to the isthmus of the hair follicle and the hair follicle bulge. Then high temperature acts on the hair, destroys (hairy papillae, hair growth points), and thus breaks the blood vessels in the bad hairy papilla atrophy it with heat, thus achieving hair removal effect.
Hair cycle - growth, decline and rest, hair follicles in the growth phase of hair removal effect, but only 10% to 20% of the hair during the growing period, it is necessary to follow a course of treatment to completely remove the hair.
Precautions after operation:
1. After treatment should pay attention to sunscreen. Don't go to the beach after two weeks.
2. Do not use hot water in the treatment area on the day, only warm water cleaning.
3. To eat spicy, seafood, etc., eat as little as possible.
4. Do not go to hot springs or saunas for three days.
5. The skin in the working area will be dry, so pay attention to hydration.
6. If the skin is obviously red after operation, ice can be used to cool down.
1. After treatment should pay attention to sunscreen. Don't go to the beach after two weeks.
2. Do not use hot water in the treatment area on the day, only warm water cleaning.
3. To eat spicy, seafood, etc., eat as little as possible.
4. Do not go to hot springs or saunas for three days.
5. The skin in the working area will be dry, so pay attention to hydration.
6. If the skin is obviously red after operation, ice can be used to cool down.
Advantages:
1. 15.6-inch high-definition touch screen (new operating system);
2. Newly developed high-performance control board + 1000W/24V constant voltage high-performance power supply + 500W pre-ignition laser power supply;
3. The handpiece uses sapphire crystal for better conductivity;
4. Newly developed high-performance outlet (AQ diode laser);
5. Hair removal handpiece adds a small link touch control screen;
6. Ming Wei switching power supply;
7. TEC semiconductor refrigerator (power: 300W/24V input) to ensure that the water temperature is below 20° for all day;
8. Particle double-layer filter (to ensure water cleanliness, improve service life, and filter water dirt);
9. 12V self-priming diaphragm pump;
10. Small waist laser handpiece (exclusive design and mold opening, with appearance patent);
11. Add 755 honeycomb lens, which can be used for facial brightening;
12. Laser head setting distance aluminum rod.
1. 15.6-inch high-definition touch screen (new operating system);
2. Newly developed high-performance control board + 1000W/24V constant voltage high-performance power supply + 500W pre-ignition laser power supply;
3. The handpiece uses sapphire crystal for better conductivity;
4. Newly developed high-performance outlet (AQ diode laser);
5. Hair removal handpiece adds a small link touch control screen;
6. Ming Wei switching power supply;
7. TEC semiconductor refrigerator (power: 300W/24V input) to ensure that the water temperature is below 20° for all day;
8. Particle double-layer filter (to ensure water cleanliness, improve service life, and filter water dirt);
9. 12V self-priming diaphragm pump;
10. Small waist laser handpiece (exclusive design and mold opening, with appearance patent);
11. Add 755 honeycomb lens, which can be used for facial brightening;
12. Laser head setting distance aluminum rod.
Laser probe function introduction:
50MM aluminum rod: Golden distance for eyebrow washing;
532NM: For color and yellow;
755NM: Honeycomb lens, mainly used for facial brightening and freckle removal;
1064NM: For blue-black, such as blue eyebrows and tattoos;
1320NM: For dark black, such as tattoos and nevus of Ota.
Parameters:
50MM aluminum rod: Golden distance for eyebrow washing;
532NM: For color and yellow;
755NM: Honeycomb lens, mainly used for facial brightening and freckle removal;
1064NM: For blue-black, such as blue eyebrows and tattoos;
1320NM: For dark black, such as tattoos and nevus of Ota.
Parameters:
Operation interface introduction:
