Light steel keel forming machine with steel as a raw material, by continuous cold rolling molding to produce complex profiles section, type multiple, versatile.Light steel keel molding machine is used to plaster board, gypsum board and other decorative finishes lightweight board made of non-load-bearing walls and roof of the building style decoration, a variety of decorative building roof shape, inside and outside the building wall and ceiling scaffolding base material.
Processing Process:
Uncoiling→Material Storage→servo feeding→punching→cold roll forming→ cutting→discharging
Technical Parameters:
Material | Colored steel sheet, galvanized steel sheet, aluminum sheet |
Thickness of coil sheet | 1.0-2.0mm |
Efficiency width | 25/30mm |
Machine details | |
Roller material | High grade NO. 45 forged steel |
Shaft material | High grade NO. 45 carbon wrought steel |
Cutting blade | Cr12 mould steel with quenched treatment |
Diameter of shaft | 70mm or as your requirement |
Main frame | 300 H steel |
Forming steps | 16 stations |
Productivity | 15-20m/min |
Hydraulic station power | 4KW |
Hydraulic pressure | 10-12MPa |
Appearance size | 7700mm*1500mm*1500mm |
Hydraulic oil | 40# hydraulic oil |
Electric tension | 380V 50 Hz 3 Phase or as your requirement |
Cut Mode | Hydraulic forming after cutting off |
Cutter material | Cr12 Heat Treatment |
Electronic control system | PLC, Touch Screen, Encoding counter |
Color | Blue, green or yellow or as your requirement |
Rolling material | 45# steel,roller surfaces polishing, hard plating |






1. OEM DESIGN AND PRODUCTION:
Our active engineer and design team can make the special machine according to your special requirement.You can appoint the international third party,such as SGS, BV,TUV, do inspection before shipment.
A: TT,100% LIC at sight,Cash, Western Union are accepted. If you have other payment terms, welcome discuss with us
