Line Array Speaker 6-10 Inches

A linear array speaker is composed of multiple closely arranged radiating units, whose amplitudes and phases remain consistent, allowing sound to propagate in a linear manner. This design enables sound to have higher directionality and stability during propagation, reducing diffraction and interference phenomena of sound.
Application scenarios
Line array speakers are mainly used in large indoor and outdoor venues, such as large sports venues, performance venues, large lecture halls, and multi-purpose halls. Due to its high directionality and stable sound field control capability, linear array speakers can meet the high requirements for sound effects in large occasions.

The linear array speakers have been carefully designed, with special treatment given to unit selection, enclosure structure, and frequency division point selection, ensuring that the high and low frequency ranges of each speaker and the high and low frequency ranges of multiple speakers above and below can be effectively coupled and stacked. However, ordinary speakers can only be used alone, and when used in combination, interference and cancellation may occur, affecting the quality of sound amplification

Equipment parameters:
TS206L enclosure structure: dual 6-inch two-way built-in driver linear array frequency response: 90Hz~20KHz Unit quantity: LF: 2x6.5 "(1.5" voice coil) HF: 1x1 "(1.75" voice coil) Rated power: 200W Peak power: 400W Maximum sound pressure level: 119dB (continuous)/122dB (peak) Equipment weight: 15.65KG Equipment size: 200 * 600 * 280mm (height x width x depth)
TS208L enclosure structure: dual 8-inch two-way built-in driver linear array frequency response: 70Hz~18KHz Unit quantity: LF: 2 × 8 "(2" voice coil) HF: 2 × 1 "(1.5" voice coil) Rated power: 400W Peak power: 800W Maximum sound pressure level: 122dB (continuous)/125dB (peak) Equipment weight: 20.3KG Equipment size: 255 * 600 * 420mm (height x width x depth)
TS210L enclosure structure: dual 10 inch two-way built-in driver linear array frequency response: 70Hz~18KHz Unit quantity: LF: 2 × 10 "(2.6" voice coil) HF: 2 × 1 "(1.75" voice coil) Rated power: 600 W Peak power: 1200W Maximum sound pressure level: 125dB (continuous)/128dB (peak) Equipment weight: 35.6KG Equipment size: 310 * 700 * 460mm (height x width x depth)
Nominal impedance: 8 ohms
Sensitivity: 96 dB
Directionality: 100 ° H (horizontal) × 10 ° V (vertical)
Box board: high-density multi-layer composite plywood
Spray painting process: environmentally friendly water-based paint
Mesh protection process: painted steel mesh
Connection socket: 2 × NL4 four pin socket
Shell protection level: IP65