Audited Supplier
RP-M0200-C2-PD56-D10-S0-CN
Magnetostrictive Displacement Sensor
Profibus-Dp( En-50170)
Linear Displacement
SemiConductor Integrated
Metal
1 / 5 / 10 / 20 / 50 / 100 μm
IP67
CE
Customized
Profibus-Dp( En-50170)
Analog Current or Voltage
1 / 5 / 10 / 20 / 50 / 100 μm
<±0.01% of Full Scale
<±0.001% of Full Scale,
<10μm
<15ppm/ºC
Arbitrary
IP67rh Stainless Steel Rod
-40ºC ~ +85ºC
35MPa (Continuous)/70MPa (Peak)
+24VDC±20%
<80mA (Varying with Range)
Max.-30VDC
Max.36VDC
TEC Sensors
Paper Tube
China
90318090
Product Description
| Output: | Profibus-DP output |
| Measuring length: | 25~5500 mm,customized according to customer needs |
| Repeat accuracy: | <±0.001% of full scale, minimum ±1µm |
| Non-linearity: | <±0.01% of full scale, minimum ±50µm |
| Operating voltage Ub: | +24Vdc ± 20% |
| Ambient temperature: | -40°C ~+85°C |
| Mechanical configuration: | Fastening M20 threads, Fastening M18 threads, Fastening 3/4" threads |
| Housing material: | Aluminum alloy |
| IP rating: | IP67 |
| Approval/Conformity: | CE |
The DP output magnetostrictive sensor meets the Profibus-DP (EN 50 170) protocol. The sensor transmits the absolute position data of the magnet ring to the controller in the form of RS-485 standard serial asynchronous, and the maximum transmit rate can reach 12Mbps. The Profibus-DP interface provides powerful diagnostic and setting functions in the form of GSD data sheets.
RP Series aluminum profile provides flexible and simple external installation mode, which is suitable for stroke or position detection of linear motion mechanism, and can also be used for external position detection of hydraulic cylinder.
Note: The measurement Non-usable area shown in the figure indicates that the output value of the sensor in this area is zero or unreliable. The default value of the measurement Non-usable area at the head and end is 28mm and 66mm respectively. The value of the measurement Non-usable area can be modified appropriately according to the customer's needs, please pointed out when ordering.
