Audited Supplier
219ZJ
Natural
Virgin
SABIC
Bag with Pallet
25kg/bag
Saudi Arabia
3901402090
Product Description
DESCRIPTION
SABIC® LLDPE 219ZJ is a butene linear low density polyethylene resin produced using solution technology, typically used for general purpose applications.
Films produced from this resin are tough with good puncture resistance, high tensile strength and good hottack properties. The resin contains slip or antiblock additive. SABIC® LLDPE 219ZJ is TNPP free.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
TYPICAL APPLICATIONS
Shipping sacks, ice bags, frozen food bags, stretch wrap film, produce bags, liners, carrier bags, garbage bags, agricultural films, laminated and coextruded films for meat wrap, frozen food and other food packaging, shrink film (for blending with LDPE), industrial consumer packaging, and high clarity film applications if blended with (10~20%) LDPE.
TYPICAL PROPERTY VALUES
PROCESSING CONDITIONS
Typical processing conditions for 219ZJ are: Melt temperature: 195 - 215°C, Blow up ratio: 2.0 - 3.0
HEALTH, SAFETY AND FOOD CONTACT REGULATIONS
Detailed information is provided in the relevant Material Safety Datasheet and or Standard Food Declaration, available on the Internet.
Additional specific information can be requested via your local Sales Office."
DISCLAIMER: This product is not intended for and must not be used in any pharmaceutical/medical applications.
QUALITY
SABIC Europe is fully certified in accordance with the internationally accepted quality standard ISO 9001.
STORAGE AND HANDLING
Polyethylene resin should be stored in a manner to prevent a direct exposure to sunlight and/or heat. The storage area should also be dry and preferably do not exceed 50°C. SABIC would not give warranty to bad storage conditions which may lead to quality deterioration such as color change, bad smell and inadequate product performance. It is advisable to process PE resin within 6 months after delivery.
ENVIRONMENT AND RECYCLING
The environmental aspects of any packaging material do not only imply waste issues but have to be considered in relation with the use of natural resources, the preservations of foodstuffs, etc. SABIC Europe considers polyethylene to be an environmentally efficient packaging material. Its low specific energy consumption and insignificant emissions to air and water designate
polyethylene as the ecological alternative in comparison with the traditional packaging materials. Recycling of packaging materials is supported by SABIC Europe whenever ecological and social benefits are achieved and where a social infrastructure for selective collecting and sorting of packaging is fostered. Whenever 'thermal' recycling of packaging (i.e. incineration with energy recovery) is carried out, polyethylene -with its fairly simple molecular structure and low amount of additives- is considered to be a trouble-free fuel.
SABIC® LLDPE 219ZJ is a butene linear low density polyethylene resin produced using solution technology, typically used for general purpose applications.
Films produced from this resin are tough with good puncture resistance, high tensile strength and good hottack properties. The resin contains slip or antiblock additive. SABIC® LLDPE 219ZJ is TNPP free.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
TYPICAL APPLICATIONS
Shipping sacks, ice bags, frozen food bags, stretch wrap film, produce bags, liners, carrier bags, garbage bags, agricultural films, laminated and coextruded films for meat wrap, frozen food and other food packaging, shrink film (for blending with LDPE), industrial consumer packaging, and high clarity film applications if blended with (10~20%) LDPE.
TYPICAL PROPERTY VALUES
PROCESSING CONDITIONS
Typical processing conditions for 219ZJ are: Melt temperature: 195 - 215°C, Blow up ratio: 2.0 - 3.0
HEALTH, SAFETY AND FOOD CONTACT REGULATIONS
Detailed information is provided in the relevant Material Safety Datasheet and or Standard Food Declaration, available on the Internet.
Additional specific information can be requested via your local Sales Office."
DISCLAIMER: This product is not intended for and must not be used in any pharmaceutical/medical applications.
QUALITY
SABIC Europe is fully certified in accordance with the internationally accepted quality standard ISO 9001.
STORAGE AND HANDLING
Polyethylene resin should be stored in a manner to prevent a direct exposure to sunlight and/or heat. The storage area should also be dry and preferably do not exceed 50°C. SABIC would not give warranty to bad storage conditions which may lead to quality deterioration such as color change, bad smell and inadequate product performance. It is advisable to process PE resin within 6 months after delivery.
ENVIRONMENT AND RECYCLING
The environmental aspects of any packaging material do not only imply waste issues but have to be considered in relation with the use of natural resources, the preservations of foodstuffs, etc. SABIC Europe considers polyethylene to be an environmentally efficient packaging material. Its low specific energy consumption and insignificant emissions to air and water designate
polyethylene as the ecological alternative in comparison with the traditional packaging materials. Recycling of packaging materials is supported by SABIC Europe whenever ecological and social benefits are achieved and where a social infrastructure for selective collecting and sorting of packaging is fostered. Whenever 'thermal' recycling of packaging (i.e. incineration with energy recovery) is carried out, polyethylene -with its fairly simple molecular structure and low amount of additives- is considered to be a trouble-free fuel.
