Liquid Silicone Rubber for Gypsum Molds/Plaster Ceiling Molds Making

Various Applications of Silicon Rubber for Gypsum Statues Moulding Making:

A: Cultural relic duplication, architectural decoration, statues
B: Resin crafts
C: Lighting ornaments, candles
D: Plaster, Gypsum, Cement, Concrete decorations
F: Model design, product exploitation, etc.

Description of Silicon Rubber for Gypsum Statues Moulding Making:

Liquid silicone, RTV 2 Silicone rubber is a premium grade silicone mold-making material that cures at room temperature to from a tough flexible rubber in approximately 24 hours. It offers excellent detail reproduction with high tear strength for long lasting molds.

Features of RTV 2 silicone rubber for intricate mold reproduction:

(1)high tensile & tear strength
(2) Low linear shrinkage
(3)free Curing agent
(4)brushing & pouring
(5) high duplication times

Instructions of RTV 2 silicone rubber for intricate mold reproduction:

1-Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.

2-vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause, and no more further steps will be available

3-Pouring mold or block mold of silicone rubber
The pouring way is an easy way to make molds, it's slowly and evenly pour into the mixed silicon rubber into the square frame. After the cross linking reaction.

Storage and Precautions of RTV 2 silicone rubber for intricate mold reproduction:

RTV Silicone Rubber is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.