Audited Supplier
T890
Yes
Transparent
Liquid
Emulsifier
Lubricant Additives, Fuel Additives, Waste Oil And Crude Oil Additives, Metalworking Fluid
15days
Synthetic
Chorus
Drum, IBC-Tank, ISO-Tank
T890
China
3811
Product Description
Product Introduction
Cutting Oil Emulsifier Additive Package is a high performance additive package, it is formulated with the component with the performance of lubricity, anti-rust, emulsion, ect., which is suitable for paraffin base oil and naphthenic base oil.
Features
The emulsifier oil prepared by this additive package is suitable for various ferrous metals and non-ferrous metals with long life.
It is good compatibility, the blended original fluid is stable and has no layer separation, the recommend treat rate is 20%.
Physical/Chemical Data
The following performance data is tested by the formulation: blended by the 20% additive package + 80% naphthenic base oil, and diluted to 5% concentration by tap water.
Recommend Formulation
20% Cutting Oil Emulsifier Additive Package + 80% naphthenic base oil, then add oleinic acid about 3-5% (blend to get clear emulsion).
Package, Storage and Transportation
The product is packed in 200KGS/drum or made to order, suitable for all means of transport. And it shall be stored in dry, cleaning, and ventilated warehouse.
Cutting Oil Emulsifier Additive Package is a high performance additive package, it is formulated with the component with the performance of lubricity, anti-rust, emulsion, ect., which is suitable for paraffin base oil and naphthenic base oil.
Features
The emulsifier oil prepared by this additive package is suitable for various ferrous metals and non-ferrous metals with long life.
It is good compatibility, the blended original fluid is stable and has no layer separation, the recommend treat rate is 20%.
Physical/Chemical Data
The following performance data is tested by the formulation: blended by the 20% additive package + 80% naphthenic base oil, and diluted to 5% concentration by tap water.
| Item | Technical Specifications | Test Method |
| Appearance | Amber Transparent Liquid | By Visual |
| Dilution Appearance | Cream White Liquid | By Visual |
| Anti-rust Performance | Qualified | Strip (24 hours) |
| PH Value (Tap Water 5%) | 8.5-9.3 | PH Meter |
| Refraction Coefficient | 1 | Enoscope |
| Aanti-foam Performance | 0ml/10min | ml/min |
Recommend Formulation
20% Cutting Oil Emulsifier Additive Package + 80% naphthenic base oil, then add oleinic acid about 3-5% (blend to get clear emulsion).
Package, Storage and Transportation
The product is packed in 200KGS/drum or made to order, suitable for all means of transport. And it shall be stored in dry, cleaning, and ventilated warehouse.
