Audited Supplier
AF003
ISO, ROHS, CE
Aluminum
Wall Formwork
Wall
AAG ALUMINUM GROUP
as Required
As required
China
Product Description
Low Weight Metal Aluminum Formwork System for Modern Building
Aluminium formwork is made of modular aluminum alloy extruded profile. It can be roughly divided into flat formwork, beam formwork, corner formwork, stair formwork, etc. Different shapes and sizes of aluminum formwork can be designed according to different project drawings. It owns one set of formwork, three sets of supporting replace three sets of formwork and supporting of plywood formwork. When using a completed project to rebuild a new building, only 10% - 20% of non-standard formwork need to be replaced. This greatly reduced the overall construction costs.
Feature
- High strength, low weight, easy to install and disassemble.
- Convenient transportation.
- Efficient construction.
- Clean construction site and smooth surface, improve the project quality.
- Standard and versatile, high reuse rate, low average cost.
- High bearing capacity, good stability.
- Environmental protection, high recycling value.
What We Can Do
Alloy: | 6063 | 6061 | 6060 | 6005 | 6082 | 6463 | 7075 |
| Temper : | T5 | T6 | T4 | ||||
| Standard: | DIN | AAMA | AS | CHINAGB | |||
| Certification: | ISO9001: 2008. | ||||||
| Surface Finish: | Mill finish | Anodizing | Powder Coating | Wood Grain | Electrophoresis | Polished | Brushed |
| Color: | Anodizing: | Silver, bronze, champagne, titanium, nickel, golden yellow, etc. | |||||
| Anodizing thickness is up to 25um. | |||||||
| Powder Coating: | White, black, bronze, grey, green, etc . | ||||||
| Powder coating thickness is more than 60um. | |||||||
| Wood Grain: | 1. Italian MENPHIS transfer printing paper. | ||||||
| 2. AKZO NOBEL INTERPON D1010(10 years warranty): Australia ceder, Bush cherry, Chest nut, Jarrah I, Jarrah II, Western red ceder, etc. | |||||||
| 3. AKZO NOBEL INTERPON D34(5 years warranty): Bush wood, Western red, Jarrah, Snow gum, etc. | |||||||
| Electrophoresis: | Silver, nickel, golden yellow, black, champagne, etc | ||||||
| Polishing | Silver, nickel, golden yellow, black, etc | ||||||
| Brushing: | Silver, nickel, golden yellow, black, bronze, etc | ||||||
| Machining: | Cutting, punching, drilling, bending, weld, mill, CNC, etc. | ||||||
| OEM customized aluminium profiles are available. | |||||||
| TABLE OF CHEMICAL COMPOSITION OF ALUMINUM ALLOY | |||||||||||
Alloy | Si | Mg | Fe | Cu | Mn | Zn | Cr | Ti | Impurity | Al | |
Unit | Total | ||||||||||
6063 | 0.2-0.6 | 0.45-0.9 | < 0.35 | < 0.1 | < 0.1 | < 0.1 | < 0.1 | < 0.1 | < 0.05 | < 0.15 | Surplus |
6061 | 0.4-0.8 | 0.8-1.2 | < 0.7 | 0.15-0.4 | < 0.15 | < 0.25 | 0.04-0.35 | < 0.15 | < 0.05 | < 0.15 | Surplus |
6060 | 0.3-0.6 | 0.35-0.6 | 0.1-0.3 | ≤0.1 | ≤0.1 | ≤0.15 | ≤0.05 | < 0.1 | < 0.05 | < 0.15 | Surplus |
| ADODIZINMG QUALITY | ||||
Grade | corrosion resistance | abrasive resistance | ||
CASS test | alkaline dropping test | sandtrial Abrasion coefficient f,g/um | ||
hours | grade | |||
AA10 | 16 | ≥ 9 | ≥ 50 | ≥ 300 |
AA15 | 32 | ≥ 9 | ≥ 75 | ≥ 300 |
AA20 | 56 | ≥ 9 | ≥ 100 | ≥ 300 |
AA25 | 72 | ≥ 9 | ≥ 125 | ≥ 300 |
| POWDER COATING QUALITY | |||||||
| Gloss values | Thickness(um) | color variation | indentation resistance | adhesion | impact resistance | cupping test | |
| Max Thickness | Min Thickness | ||||||
| 60 | ≤ 120 | ≥ 40 | Color should be consistent with the sample color | ≥ 80 | 0 | No cracking and shedding phenomenon after the front impact test,small fine lines around the concave is allowed | No cracking and shedding phenomenon after the cupping test ( 6mm indentation depth ) |
FAQ
Q1: What's the thickness for anodizing? Can you do 15um?
A: Our normal thickness is about 10 um. Yes, we can do 15um and above.
Q2: What color you can do for powder coating? The thickness for powder coat?
A: We can do any color for powder coat as long as you can provide the color sample. Our normally powder coating thickness is 60-80um.
Q3: What color you can do for wood grain?
A: Our most popular colors are Western Red Cedar, Australia Cedar, Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western Wood, Snow Gum, etc. If you need any other colors, we can do according to the color samples you provide.
Q4: How's the weather resistance for wood grain finish D1010?
A: (1). Powder: Akzo Noble Interpon D1010.
(2). Wood grain film: Italian Menphis.
(3). Standard complied: American AAMA Standard.2603
(4). UV test:1000 hours.
(5). Salt spraying test:1000 hours.
(6). Normal weather: 10 years color guarantee.
Q5: What's your MOQ?
A: Normally speaking, it's 2 tons.
Q6: What's payment terms?
A: Usually by T/T, 30% deposit and the balance paid before shipment.
Q7: What certification do you have? What's your standard?
A: We have ISO certification. Our standard is DIN, AAMA, AS/NZS, China GB.
Q8: What's the delivery time for samples and mass production?
A: (1). 2-3 weeks to open the new moulds and make free samples.
(2). 3-4 weeks after receipt of deposit and confirmation of the order.
Contact us:
Poppy Chan
Poppy Chan
