Audited Supplier
FC-T100----FC-T800
1year
1year
ASTM, GOST, GB, JIS, BS
Grinding/Spray
Recycle
Double Alloy/Powder Alloy
0.05 M
1.5~3.0mm Depending on Different Alloy Coating
0.4~0.7mm
HRC50~70 Depending on Different Alloys
HRC50~70
Fa Chang Screw
Wooden Case Packing
Suzhou
84779000
Product Description
Our different kinds of Screw Barrel sets suit for Brands of:
ENGEL,Krauss Maffei, ARBURG, Sumitomo DEMAG, JSW, HUSKY,NISSEI,HAITIAN, FANUC, YIZUMI,WELLTEC,TOYO, etc.
Cutomzied Screws and Barrels are available.
One Screw Barrel set including:
Srew, Barrel, Screw tip, Sleeve, Ring, Srcrew nozzle, Flange.
You just need let us know:
what is the brand and model of your machine?
what's the tons of your machine tons?
what plastic materials do you use?
how much GF do you add in the plastic materials?
------Then we can quote to you ASAP.
Our Production time: 20 to 30 canlendar days;
ENGEL,Krauss Maffei, ARBURG, Sumitomo DEMAG, JSW, HUSKY,NISSEI,HAITIAN, FANUC, YIZUMI,WELLTEC,TOYO, etc.
Cutomzied Screws and Barrels are available.
One Screw Barrel set including:
Srew, Barrel, Screw tip, Sleeve, Ring, Srcrew nozzle, Flange.
You just need let us know:
what is the brand and model of your machine?
what's the tons of your machine tons?
what plastic materials do you use?
how much GF do you add in the plastic materials?
------Then we can quote to you ASAP.
Our Production time: 20 to 30 canlendar days;
| Barrel Selection Guide | |||||||
| Model | Product Name | Technology | Hardness | Plastic Range | Scope of application | Wear-Resistant | Corrossion-Resistant |
| FC-T100 | Nitriding Steel | Nitridation | HV960 degree above | Common materials No fiber added | Suitable for injection molding of common raw materials without GF and flame retardant wehn the material termpreture is lower than 280 | ★★ | ★★ |
| FC-T200 | Iron-based alloy | Centrifugal Casting | 58-62 | GF 30% or less | High Wear resistance, moderate corrosion resistance, High temperature resistance (lower than 420 C) | ★★★ | ★★ |
| FC-T300 | Nickel Base | Centrifugal Casting | 61-62 | GF50% or less | Suitable for halogen-free plastic 50% GF, Carbon Fiber, mineral fiber,metal powder injection, ceramic injection and other high wear and corrosion working conditions. | ★★★★ | ★★★★★ |
| FC-T700 | Cobalt-based alloy | HIP | 63-65 | GF 60% or less | Suitable for high temperature, high pressure and high speed forming conditions such as high tempreture transparent PC, optial products, narrow fame, PEEK, PEI, etc. | ★★★★★ | ★★★★★ |
| FC-T800 | Halogen Free Ceramics | HIP | 65-67 | GF 65% or less | Corrosion resistant 65% GF, VO+halogen-free flame retardant | ★★★★★★ | ★★★★★★ |
