Audited Supplier
W alloy
Rodbar Sheet Plate Tube Disc Pipe
Tungsten Alloy
Low Carbon
100mm
No
No
>17.2g/cm3
W90nife W92nife W95nife W97nife
Jiangchi
Wooden Box
Dia(1-10mm)*L (150, 175, 200, 800-1000)
China
8101990000
Product Description
High Quality Tungsten High Heavy Alloy ASTM B777-07 rods/sheet/tubes
Material:W90-97NiFe(Magnetic)&W90-97NiCu(Nonmagnetic)
Density:16.8-18.8g/cm3
High density Tungsten based alloy shot/ball
Tungsten Alloy Density: (17~18.5)
Tungsten Alloy component: W(88-98)% with the addition of nickel and copper or nickel and iron, etc
Tungsten Alloy applications: For making rotors of aircraft wings, shileding materias for radioactive isotope (Cobalt 60), and formaterials of armor piercing bullets and mould, etc.
Tungsten high heavy alloy
Production Method
1), Blending of tungsten powder with other metal powders and a bonding agent, cooling and sieving.
2), Pressing the blended powder to the required shape (allowing for shrinkage during the final processing), and shaping the green part component.
3). Pre-sintering the pressed components to remove the bonding agent.
Final sintering in the hydrogen fed furnace to fuse the powder particles together.
4). Supplied in bar, square, round and rectangle sizes are available in rough oversize, or turned or ground to exact requirements. Components can also be produced to customer drawings.
Pure tungsten rods
1. 99.95% Pure Tungsten Rods
Excellent price 99.95% black molybdenum rods description
1)Purity: ≥99.95%
2)Forged density:>19.2g/cm3
3)Welding tungsten rod: WT WL WP WC WY, and dia1.0-10mm Length: 150/175/1100mm
4)Surface:black,ground,polished
5) Rod Size: diameter2-120mm Length<2500mm
6)Straightened rods after drawn diameter0.8mm-3.2mm
2.Tungsten rods surface finish:
Black:Surface is "as swaged" or "as drawn"; retaining a coating of processing lubricants and oxides.
Cleaned - Surface is chemically cleaned to remove all lubricants and oxides.
Ground - Surface is centerless ground to remove all coating and to achieve precise diameter control.
Tungsten High Heavy Alloy
Tungsten copper alloy rod Specification:
Material:
WNiCu (W90Ni6Cu4, W92, W95, W97.5, W90Ni7Cu3, etc)
WNiFe (W90Ni7Fe3, W92, W95, W97.5, W90NiFe, etc)
Density: 16.8g/cm3-18.85g/cm3
W heavy alloy foil size: Thickness(0.1-100mm)*Width<120mm*Length<300mm
W heavy alloy sheet size: diameter(1-100mm)*L<500mm
Tungsten Alloy
Content: Material: WCu (W50 W55 W60 W65 W70Cu, W75Cu, W80Cu, W85Cu, W90Cu, etc)
Product standard: GB8320-87
WCu alloy foil size: Thickness(0.08-0.7mm)*Width<120mm*Length<300mm
WCu alloy sheet size: diameter(3-100mm)*L<500mm
Property of tungsten alloy
AMST 21014 class 1
90%WNiFe, 90%WNiCu
Density : 17.0
Hardness: 32HRC max
Elongation: 5-20%
AMST 21014 class 2
92.5%WNiFe, 92.5%WNiCu
Density : 17.2
Hardness: 33HRC max
Elongation: 5-15%
AMST 21014 class 3
95%WNiFe, W95NiCu
Density : 18.0
Hardness: 34HRC max
Elongation: 3-10%
AMST 21014 class 4
97.5%WNiFe, W97.5NiCu
Density : 18.85
Hardness: 35HRC max
Elongation: 1-8%
Tungsten high heavy aloy
- Material: W90-97NiFe(Magnetic) & W90-97NiCu(Nonmagnetic)
- Density:16.8-18.8g/cm3
- Rods Size:dia(1.5 -200) x Length<500mm
Plate size: 0.1min Thickness*W*L
1. Tungsten copper alloy rod Specification:
Material: W50-90Cu10-50
Density: 11.85g/cm3-16.75g/cm3
Product standard: GB8320-87
WCu alloy foil size: Thickness(0.08-0.7mm)*Width<120mm*Length<300mm
WCu alloy sheet size: diameter(3-100mm)*L<500mm
2. Pure tungsten/molybdenum rod surface finish:
Black: surface is as swaged or as drawn, retaining a ciating of processing lubricants and oxides.
Cleaned: Surface is chemically cleaned to removed all lubricants and oxides.
Ground: Surface is centerless to ground to remove all coating and to achieve precise diameter control.
3. Pure tungsten rod dimension:
Tungsten rods available size:
Forged rods size: Diameter(2-100mm)*Length<2500mm
Strainghtened rods after drawn diameter 0.8-3.2mm
4. Application & Features
Used as electrodes in the field of rare earth metal industry;
For producing electric light source parts and electric vacuum components;
Used in electric boosting glass kiln electrode;
Suitable for producing ion implantation parts;
For producing heating elements and refractory parts in high teperature furnaces;
Very good interlaminar strength at strong thermal and mechanical loadings
5. More information about us:
We promise you -- The advantage of us:
1) products quality, with many years of producing experience
2) low price in the market, and factory direct sales.
3) the whole production line from powder to finished products, top and steady quality assured
4) good packing for safe exprot delivery, and fast manufacturing time
5) fast delivery and best after-sale service
Material:W90-97NiFe(Magnetic)&W90-97NiCu(Nonmagnetic)
Density:16.8-18.8g/cm3
High density Tungsten based alloy shot/ball
Tungsten Alloy Density: (17~18.5)
Tungsten Alloy component: W(88-98)% with the addition of nickel and copper or nickel and iron, etc
Tungsten Alloy applications: For making rotors of aircraft wings, shileding materias for radioactive isotope (Cobalt 60), and formaterials of armor piercing bullets and mould, etc.
Tungsten high heavy alloy
Production Method
1), Blending of tungsten powder with other metal powders and a bonding agent, cooling and sieving.
2), Pressing the blended powder to the required shape (allowing for shrinkage during the final processing), and shaping the green part component.
3). Pre-sintering the pressed components to remove the bonding agent.
Final sintering in the hydrogen fed furnace to fuse the powder particles together.
4). Supplied in bar, square, round and rectangle sizes are available in rough oversize, or turned or ground to exact requirements. Components can also be produced to customer drawings.
Pure tungsten rods
1. 99.95% Pure Tungsten Rods
Excellent price 99.95% black molybdenum rods description
1)Purity: ≥99.95%
2)Forged density:>19.2g/cm3
3)Welding tungsten rod: WT WL WP WC WY, and dia1.0-10mm Length: 150/175/1100mm
4)Surface:black,ground,polished
5) Rod Size: diameter2-120mm Length<2500mm
6)Straightened rods after drawn diameter0.8mm-3.2mm
2.Tungsten rods surface finish:
Black:Surface is "as swaged" or "as drawn"; retaining a coating of processing lubricants and oxides.
Cleaned - Surface is chemically cleaned to remove all lubricants and oxides.
Ground - Surface is centerless ground to remove all coating and to achieve precise diameter control.
Tungsten High Heavy Alloy
Tungsten copper alloy rod Specification:
Material:
WNiCu (W90Ni6Cu4, W92, W95, W97.5, W90Ni7Cu3, etc)
WNiFe (W90Ni7Fe3, W92, W95, W97.5, W90NiFe, etc)
Density: 16.8g/cm3-18.85g/cm3
W heavy alloy foil size: Thickness(0.1-100mm)*Width<120mm*Length<300mm
W heavy alloy sheet size: diameter(1-100mm)*L<500mm
Tungsten Alloy
Content: Material: WCu (W50 W55 W60 W65 W70Cu, W75Cu, W80Cu, W85Cu, W90Cu, etc)
Product standard: GB8320-87
WCu alloy foil size: Thickness(0.08-0.7mm)*Width<120mm*Length<300mm
WCu alloy sheet size: diameter(3-100mm)*L<500mm
Property of tungsten alloy
AMST 21014 class 1
90%WNiFe, 90%WNiCu
Density : 17.0
Hardness: 32HRC max
Elongation: 5-20%
AMST 21014 class 2
92.5%WNiFe, 92.5%WNiCu
Density : 17.2
Hardness: 33HRC max
Elongation: 5-15%
AMST 21014 class 3
95%WNiFe, W95NiCu
Density : 18.0
Hardness: 34HRC max
Elongation: 3-10%
AMST 21014 class 4
97.5%WNiFe, W97.5NiCu
Density : 18.85
Hardness: 35HRC max
Elongation: 1-8%
Tungsten high heavy aloy
- Material: W90-97NiFe(Magnetic) & W90-97NiCu(Nonmagnetic)
- Density:16.8-18.8g/cm3
- Rods Size:dia(1.5 -200) x Length<500mm
Plate size: 0.1min Thickness*W*L
1. Tungsten copper alloy rod Specification:
Material: W50-90Cu10-50
Density: 11.85g/cm3-16.75g/cm3
Product standard: GB8320-87
WCu alloy foil size: Thickness(0.08-0.7mm)*Width<120mm*Length<300mm
WCu alloy sheet size: diameter(3-100mm)*L<500mm
2. Pure tungsten/molybdenum rod surface finish:
Black: surface is as swaged or as drawn, retaining a ciating of processing lubricants and oxides.
Cleaned: Surface is chemically cleaned to removed all lubricants and oxides.
Ground: Surface is centerless to ground to remove all coating and to achieve precise diameter control.
3. Pure tungsten rod dimension:
| Tungsten Content | Type | Diameter (mm) | Dia.Tolerance (mm) | Length (mm) | L tolerance (mm) |
| 99.95% | Sintering rod | 40-100 | ±3 | 500max | ±5 |
| 99.95% | Froged rod | 20-80 | ±2 | 800max | ±5 |
| 99.95% | Ground rod | 2-60 | ±0.1 | 600max | ±1 |
Forged rods size: Diameter(2-100mm)*Length<2500mm
Strainghtened rods after drawn diameter 0.8-3.2mm
4. Application & Features
Used as electrodes in the field of rare earth metal industry;
For producing electric light source parts and electric vacuum components;
Used in electric boosting glass kiln electrode;
Suitable for producing ion implantation parts;
For producing heating elements and refractory parts in high teperature furnaces;
Very good interlaminar strength at strong thermal and mechanical loadings
5. More information about us:
We promise you -- The advantage of us:
1) products quality, with many years of producing experience
2) low price in the market, and factory direct sales.
3) the whole production line from powder to finished products, top and steady quality assured
4) good packing for safe exprot delivery, and fast manufacturing time
5) fast delivery and best after-sale service
