Audited Supplier
SBC-16
Solidity
Coating
1 Year
Normal Pressure and Temperature
Pointer Display
Semi-automatic
0-50kg
Non-Customized
Product Description
SBC-16 is a compact tabletop coating system, suitable for the coating of non-conductive samples in SEM imaging, especially suitable for samples that are not resistant to high temperature. No heat damage, and it has a protective effect on the sample, to avoid deformation (such as: film samples, resins, etc.)
Main features
1. Economic, reliable, beautiful appearance.
2. High film forming rate.
3. Low substrate temperature.
4. Good film adhesion
5. Large area coating can be achieved.
6. Can adjust the sputtering current and vacuum chamber pressure to control the coating rate and particle size.
7. the manual start button can be pre-set the pressure and sputtering current to avoid unnecessary damage to the film.
8. Vacuum protection can avoid short circuit caused by low vacuum.
9. Cold fine spraying process through the high-efficiency low-voltage DC magnetic control head, to avoid sample surface damage
Specifications
Main features
1. Economic, reliable, beautiful appearance.
2. High film forming rate.
3. Low substrate temperature.
4. Good film adhesion
5. Large area coating can be achieved.
6. Can adjust the sputtering current and vacuum chamber pressure to control the coating rate and particle size.
7. the manual start button can be pre-set the pressure and sputtering current to avoid unnecessary damage to the film.
8. Vacuum protection can avoid short circuit caused by low vacuum.
9. Cold fine spraying process through the high-efficiency low-voltage DC magnetic control head, to avoid sample surface damage
Specifications
| Sputtering system | |
| Sputtering Target | Au (Standard target), Pt (optional target),φ57mm x 0.1mmthk |
| Standard sample stage | Can be loaded with 12 Sample holders, adjustable range of height is 60mm |
| Sputtering current | Microprocessor control, security interlock, adjustable, current 5~30mA, programmed digital control |
| Gauge table | Vacuum: Atm - 1*10-3 mbar, Current: 0~99mA |
| Control method | Microprocessing controller (1-999s) with "Start" and "pause" buttons, automatic pumping, sputtering, automatically deflate after shutdown. |
| Vacuum system | |
| Pumping speed | 133L/MIN |
| Ultimate Vacuum | 10-4 mbar |
| Noise level | 56dB |
