Audited Supplier
PPM-HLZ-2
1 year
1 year
LED
Oil Analysis
Portable
RoHS, CE, ISO9001
Particle Contamination Level
CSPPM
Standard Package for Exporting
1kg
Changsha, China
Product Description
Description
According to the statistics, the percent of f hydraulic system failure caused by particle was 60%~70%. the particle in oil will accelerate abrasion of hydraulic system, cause blockage and eventually cause failure of hydraulic system.
The PPM-HLZ-2 can measure particle information in oil and offer alarm function, it features high sensitivity, high reliability and quick detection. With the help of this monitor, you will find wear fault of machinery in time to avoid larger loss.Because of it's small size, it is convenient to be installed in oil filter, hydraulic system.
Features
1. Adopts light blockage method, with good anti-interference, accuracy, repeatability.
2. Advanced sensor inside to ensure high resolution and accuracy.
3. Built-in different particle contamination level standards, including GB/T14039, ISO4406, NAS1638, GJB420A, GJB420B and so on. The standard can be set by user's requirement.
4. Built-in calibration function, able to calibrate by ISO4402 or GB/T18854-2002 (ISO11171:1999) standard.
5. Two calibration curve(ACFTD, ISOMTD) is stored, can be switched easily, decrease error.
6. RS232, RS485, CAN protocol are alternative.
7. It can automatically detect online, and real time indicate particle contamination level.Detection interval can be set by user.
8. It can measure flow at the same time.
9. Aluminum housing, can be applied in harsh areas
Application
Aviation, the electricity industry, Oil industry, chemical industry, port machinery, metallurgy, hydraulic system.
Specification
| Detection channel | 8 |
| Light source | Semiconductor laser |
| Particle size | 1~600 μm |
| Regular particle size (μm) | 1, 2, 5, 10, 15, 25, 50, 100; 1, 4, 6, 10, 14, 21 38, 70 μm(c) |
| Sensitivity | 1μm(ISO4402), or 4μm(c) (GB/T18854,ISO11171) |
| Counting Volume | 10ml |
| Accuracy | ±0.5 contamination level |
| Oil temperature | 0~80ºC |
| Display | OLED display |
| Flow range | 12~300ml/min |
| Pressure range | 0.2~10MPa(With pressure relief devices, the max pressure can be 40MPa) |
| Signal output | RS485, RS232, CAN |
| Operating temperature | -20~60ºC |
| Storage temperature | -30~80ºC |
| Power supply | 100~265VAC, or 9~11VDC |
| Process connection | Φ6 or Φ4 hose (with M14 internal thread stainless steel connector) |
| Dimensions | 100*75*70mm |
| Weight | 1kg |
