Audited Supplier
PPM-S111A
SemiConductor Strain Gauge Pressure Sensors
SemiConductor Type
Diffused Silicon Pressure Transmitter
Analog Type
Integration
Stainless Steel
M
Four-Wire
Gas
IP65
CMC
Customized
CSPPM
Carton
Stainless steel
Chanhgsha
Product Description
Description
The PPM-S111A pressure sensor is designed for hydrodynamics experiment which require small size sensor. It features high response frequency, stability, reliability.The precision of the micro pressure sensor is higher than the piezoelectric dynamic pressure sensor.
Application
engine inlets, chemical explosion test, tunnel, material, hydrodynamics, acoustics, civil engineering, rock-soil mechanics, hydraulic power mechanical test.
Specification
| Measuring medium | Gas, liquid |
| Pressure type | Gauge pressure(G), Sealed pressure(S),Absolute pressure(A) |
| Measuring range | -100kPa~0~10kPa~1MPa~10MPa |
| Power supply | 0.5-2.0mA,5-12VDC |
| Output signal | 100mV(Typical value) |
| Transmitter output | Power supply:24VDC(±15VDC), Output signal:0-5VDC, 4-20mA |
| Nonlinearity | 0.2% FS, 0.5% FS |
| Repeatability | 0.05%FS |
| Accuracy | ±0.2%FS, ±0.5%FS |
| Long-term stability | 0.2%FS/year |
| Temperature | -40~85ºC |
| Response frequency | 500kHz |
| Input impedance | 5kΩ |
| Insulation resistance | >500 MΩ/100VDC |
| Overpressure | 200%FS |
| Damage pressure | 500%FS |
| Process connection | M5,M6 or others on request |
| Relative humidity | 0~95% RH |
| Ingress protection | IP65 |
| Electric connection | Cable outlet, connector |
Dimensions in mm
