Audited Supplier
G1-0006-408-5
on Site on Line
12 Months
Casting
Galvanized
According Customer's Requirement
According Customer's Requirement
Gritface Tong Die Size
11-0006-408-P
Standard Case
New
MCCOY
Wooden Case
5/8" * 3/8"*4-1/2"
China
84314310
Product Description
"MCCOY " GRITFACE TONG DIE SIZE : 5/8" * 3/8"*4-1/2" P/N:G1-0006-408-5
The GRITFACE die and insert coating system combines the use of extremely hard grit particles, high strength corrosion resistant brazing materials and application processes which insure optimum dimensional control.
Tungsten carbide grit particles are graded by size and shape to provide uniform granules with desired geometry. Different particle sizes are selected based on the intended application. Coatings on smooth faced dies use larger particles than the coatings applied to dies that have machined teeth. Coating thickness for small particles is approximately 0.010". Thickness for standard large particle coating is approximately 0.025".
Tungsten carbide refractory material manufacturing processes control the chemistry of the grit particles to prevent iron contamination¹. The tungsten carbide particles are metallurgically bonded to the die substrate using a high strength nickel/chrome compound. It is important to note these materials are alloys together at extremely high temperatures so there is no free iron available to contaminate CRA tubulars. The same can be said for the iron that makes up the majority of the materials employed to produce CRA tubular goods. Third party metallurgical laboratory analysis has demonstrated through the use of scanning electron microscope and secondary electron imaging processes that the completed GRITFACE dies and inserts do not contain free iron.
| FAQ |
| Q: How can I place order? |
| A:You can contact us by email about your order details, or place order on line |
| Q: How can l pay you? |
| A:After you confrm our Pl, we will request you to pay.T/T (HSBC bank) and Paypal, Western Union are the most usual ways we are using |
| Q: What's the order procedure? |
| A: First we discuss order details, production details by email or TM. Then we issue you an Pl for your confirmation.You will be requested to do prepaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25 days if we don't have the items in stock. Before production has been fnished,we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you. |
| Q:How do you take care when your clients received defective products? |
| A:replacement. If there are some defective items, we usually credit to our customer or replace in next shipment. |
| Q: How do you check all the goods in the production line? |
| A:We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure. |
