Audited Supplier
TKE--089
24 Hours Online
1 Year
CE, ISO
Heater, Cooler, Vaporizer, Condenser
Regenerative Heat Exchanger
Plate Type
Stainless Steel
Direct Evapoating
Steam Heating
PLC Fuly Sutomatic/Semi-Automatic/Manual Control
30-60 Days
TAIKANG
Seaworthy Packing
CE, ISO, SGS
China
8419899090
Product Description
| Sr.No | Evaporation Rate(kg/h) | Feed Density | Heat Area | Condenser | Cooling Water | Weight(KG) | Power | Material |
| 1 | 1000 | 1-3% | 34,21,21 | 22 | 30T/H | 7000 | 31.5KW | 316L |
| 2 | 1477 | 1.5% | 52,33,33 | 34 | 45T/H | 9000 | 42.5KW | 316L |
| 3 | 1490 | 15% | 54,33,33 | 34 | 45T/H | 9000 | 55KW | 316L |
| 4 | 1500 | 2-5% | 51,32,32 | 33 | 45T/H | 9000 | 35.5KW | 316L |
| 5 | 1584 | 11% | 53,33,33 | 34 | 45T/H | 8000 | 304 | |
| 6 | 1615 | 5-6% | 57,35,35 | 36 | 48T/H | 7500 | 40.5KW | TA2,316L |
Specifications:
1.Material:SS316L/SS304
2.Steam pressure (Mpa):0.5-0.8
3.Evaporation temperature:45-90
4.Evaporation capaicty: 500~50000L/h
Application:
It's applicable to waste water treatment, dairy products, pharmacy, glucose, starch,chemical industry,lose, citric acid, ammonium sulfate, biological engineering, environmental engineering and treatment. etc.
Equipment structure:
It consists of (first-effect, second-effect, third-effect)separators and evaporators and pre-heater,condenser and vacuum pump, feeding pump,circulation pump, discharge pump, condensed water pump and system pipe fittings, etc. Equipped wit CIP spraying cleaning ball, vacuum gauge, thermometer,pressure gauge,and so on.
Equipment characteristics:
1. Material: SUS304 or SUS316L,TA2;
2.Full closed process, fast and low temperature evaporation;
3.Inside pipes are mirror polishing seamless sanitary pipes, so material is not easy to paste on the pipe all, it's easy for cleaning;
4.Low steam consumption: 1kg steam can evaporator 3.5kg water;
5.Low evaporation temperature:part of secondary steam can be inhaled into single-effect heater through spray type hot pressure pump, this would make full use of the heat and the evaporation temperature is low.
6.Large concentration ratio: adopt falling film evaporation, which make the material liquid with larger viscosity be easy to flow and evaporate, hard to scale, short concentration time, the concentration ratio can reach to 1:5.
7.This equipment can realize automatic production, intellectual system management, which is in conformity with GMP standard.
8.Can be designed into different technological process according to the different characteristics of the materials , also can according to different users' requirements equip with automatic control system.
